7 open source boards using the AS6C1008
Real designs built with the AS6C1008, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 84 parts
Nanocomp6809
breadboardinglabs
84 partsApache-2.024 
RP2040/RP2350Econopet
DLehenbauer
262.5 × 108 mm284 parts2LCC0-1.018
RP2040/RP2350Commodore pet clone
262.5 × 108 mm258 parts2LCC0-1.013
Rc-256page
PickledDog
99.1 × 49.9 mm12 parts2LApache-2.02
V40 64K 640K ISA
homebrew8088
145.8 × 91.4 mm23 parts2LGPL-3.0238
MemExpansion
ja1umi
155 × 114 mm27 parts2LMIT10
64K 640K ISA
104 × 73.9 mm12 parts2LGPL-3.0238
The AS6C1008 in open source designs
The gallery holds 7 open source boards using the AS6C1008 from 6 GitHub repositories; a typical one measures about 150.4 × 99.7 mm and carries around 27 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is V40 64K 640K ISA by homebrew8088.
Parts used alongside the AS6C1008
Microcontrollers on boards using the AS6C1008
What boards using the AS6C1008 are built for
AS6C1008: common questions
Where can I find a AS6C1008 reference design?
Each of the 7 boards on this page is a real design using the AS6C1008. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the AS6C1008?
The 74LS245, 74LS145, LM317AG-TN3-R, RP2040 and SN74LS07 appear in the most repositories here.
Which microcontrollers do boards using the AS6C1008 use?
Most are built on RP2040/RP2350 (2).
How big is a typical board using the AS6C1008?
The median is 150.4 × 99.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the AS6C1008?
By GitHub stars, V40 64K 640K ISA by homebrew8088, with 238 stars.
Can I simulate one of these boards using the AS6C1008 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.