6 open source boards using the AT24CS01-ST
Real designs built with the AT24CS01-ST, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Lpddr4-testbed
antmicro
69.6 × 30 mm64 parts6LApache-2.026
Lpddr5-testbed
69.6 × 40 mm155 parts6LApache-2.014
Ddr5-testbed
69.6 × 30 mm60 parts6LApache-2.013
STM32Stm32h7-renode reference platform
100 × 60 mm380 parts6LApache-2.01
ESP32Capable jetson carrier
CapableRobot
100 × 55 mm344 parts6LApache-2.00
ESP32CRMHJN capable carrier
122 × 77 mm344 parts6LApache-2.00
The AT24CS01-ST in open source designs
The gallery holds 6 open source boards using the AT24CS01-ST from 5 GitHub repositories; a typical one measures about 84.8 × 47.5 mm and carries around 250 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Lpddr4-testbed by antmicro.
Parts used alongside the AT24CS01-ST
What boards using the AT24CS01-ST are built for
AT24CS01-ST: common questions
Where can I find a AT24CS01-ST reference design?
Each of the 6 boards on this page is a real design using the AT24CS01-ST. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AT24CS01-ST use?
Most are built on ESP32 (2) and STM32 (1).
How big is a typical board using the AT24CS01-ST?
The median is 84.8 × 47.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the AT24CS01-ST?
By GitHub stars, Lpddr4-testbed by antmicro, with 26 stars.
Can I simulate one of these boards using the AT24CS01-ST before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.