12 open source boards using the AT24CS01-ST
Real designs built with the AT24CS01-ST, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Lpddr4-testbed
antmicro
69.6 × 30 mm64 parts6LApache-2.026Lpddr5-testbed
antmicro
69.6 × 40 mm155 parts6LApache-2.014Ddr5-testbed
antmicro
69.6 × 30 mm60 parts6LApache-2.013Jetson-AI-Cam-CopperPilot
CopperPilot
78 × 55 mm268 parts8LCERN-OHL-P-2.09STM32
Stm32h7-renode reference platform
antmicro
100 × 60 mm380 parts6LApache-2.01STM32
Jetson Xavier/Orin NX + PX4 Board
PranavNedunghat
139 × 57.4 mm478 parts8LApache-2.00ESP32
Capable jetson carrier
CapableRobot
100 × 55 mm344 parts6LApache-2.00STM32
V1.3
PranavNedunghat
66 × 8.8 mm475 parts8LApache-2.00ESP32
CRMHJN capable carrier
CapableRobot
122 × 77 mm344 parts6LApache-2.00STM32
V1.1 version control
PranavNedunghat
66 × 8.8 mm473 parts8LApache-2.00STM32
V1.1 XT30 version
PranavNedunghat
4.5 × 57.9 mm473 parts8LApache-2.00STM32
V1.2
PranavNedunghat
66 × 8.8 mm471 parts8LApache-2.00
How designs wire the AT24CS01-ST
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the AT24CS01-ST connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 6 of 7 designs.
- The SCL pin has a series resistor on 5 of 7 designs.
- The SDA pin has a series resistor on 5 of 7 designs.
- The WP pin is tied to GND on 5 of 7 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SCLpin 1 | Connected to: A connector 57%, PCA6408APW 29%, 2309413-1 29% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| SDApin 3 | Connected to: A connector 57%, PCA6408APW 29%, 2309413-1 29% |
|
| VCCpin 4 | Connected to: 1.8V 71% · a signal 29% |
|
| WPpin 5 | Connected to: GND 71% · a signal 29% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Lpddr4-testbed by antmicro, Lpddr5-testbed by antmicro, Ddr5-testbed by antmicro and Jetson-AI-Cam-CopperPilot by CopperPilot.
The AT24CS01-ST in open source designs
The gallery holds 12 open source boards using the AT24CS01-ST from 7 GitHub repositories; a typical one measures about 69.6 × 47.5 mm and carries around 362 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Lpddr4-testbed by antmicro.
Parts used alongside the AT24CS01-ST
What boards using the AT24CS01-ST are built for
AT24CS01-ST: common questions
Where can I find a AT24CS01-ST reference design?
Each of the 12 boards on this page is a real design using the AT24CS01-ST. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the AT24CS01-ST VCC pin?
The VCC pin has a decoupling capacitor on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the AT24CS01-ST.
What resistor goes on the AT24CS01-ST SCL pin?
The SCL pin has a series resistor on 5 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the AT24CS01-ST.
What resistor goes on the AT24CS01-ST SDA pin?
The SDA pin has a series resistor on 5 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the AT24CS01-ST.
What parts are used alongside the AT24CS01-ST?
The PCA9547BS,118, SN74LVC1G126DCKR, SN74LXC1T45DBVR, TPS7A0518PDBVT and 74HC00PW appear in the most repositories here.
Which microcontrollers do boards using the AT24CS01-ST use?
Most are built on STM32 (6) and ESP32 (2).
How big is a typical board using the AT24CS01-ST?
The median is 69.6 × 47.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the AT24CS01-ST?
By GitHub stars, Lpddr4-testbed by antmicro, with 26 stars.
Can I simulate one of these boards using the AT24CS01-ST before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.