6 open source boards using the PCA6408APW

Real designs built with the PCA6408APW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The PCA6408APW in open source designs

The gallery holds 6 open source boards using the PCA6408APW from 4 GitHub repositories; a typical one measures about 80 × 45 mm and carries around 108 components.

67% use four copper layers or more, and 100% carry an open source license.

The most starred is Base board by GlasgowEmbedded.

Microcontrollers on boards using the PCA6408APW

What boards using the PCA6408APW are built for

PCA6408APW: common questions

Where can I find a PCA6408APW reference design?

Each of the 6 boards on this page is a real design using the PCA6408APW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the PCA6408APW?

The APX811-40UG-7, AT24CS01-ST, BL24C256A-SFRC, CY7C68013A-56LTXC and DAC081C081CIMK/NOPB appear in the most repositories here.

Which microcontrollers do boards using the PCA6408APW use?

Most are built on FPGA (2).

How big is a typical board using the PCA6408APW?

The median is 80 × 45 mm, and 33% are two-layer designs.

What is the most popular open source board using the PCA6408APW?

By GitHub stars, Base board by GlasgowEmbedded, with 2,229 stars.

Can I simulate one of these boards using the PCA6408APW before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part