16 open source boards using the DRV2605LDGSR
Real designs built with the DRV2605LDGSR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Kompic Mk1b
porupski
44.5 × 50.6 mm121 parts4LGPL-3.02
K2601-Doomsday-Comms-System
MixedSignalDevelopment
62 × 45.9 mm43 parts4LMIT1
STM32Analog ai chip
vyquocvu
70 × 52 mm21 parts4LMIT1
Nordic nRFAura a04
Avinash1286
35.2 × 35.2 mm72 parts4LMIT0
ESP32Kompic Mk1
44.5 × 50.6 mm119 parts4LGPL-3.02
Nordic nRFAura a03
24 × 42 mm61 parts4LMIT0
Nordic nRFAura a03-before ground refinement
24 × 42 mm61 parts4LMIT0
Nordic nRFAura a03-before placement refinement
24 × 42 mm61 parts4LMIT0
Nordic nRFAura a03-before second placement refinement
24 × 42 mm61 parts4LMIT0
Nordic nRFAura a03-native routing
24 × 42 mm61 parts4LMIT0
Nordic nRFEdge io ring
gunnchOS3k
19 × 19 mm8 parts2LMIT0
Nordic nRFAura a03-working
24 × 42 mm61 parts4LMIT0
Nordic nRFAura placement
24 × 42 mm61 parts4LMIT0
Nordic nRFAura a02-routing draft
24 × 34 mm59 parts4LMIT0
Nordic nRFEarly export
24 × 34 mm59 parts4LMIT0
Nordic nRFKrt failed
24 × 34 mm59 parts4LMIT0
The DRV2605LDGSR in open source designs
The gallery holds 16 open source boards using the DRV2605LDGSR from 5 GitHub repositories; a typical one measures about 24 × 42 mm and carries around 61 components.
94% use four copper layers or more, and 100% carry an open source license.
The most starred is Kompic Mk1b by porupski.
Parts used alongside the DRV2605LDGSR
Microcontrollers on boards using the DRV2605LDGSR
What boards using the DRV2605LDGSR are built for
DRV2605LDGSR: common questions
Where can I find a DRV2605LDGSR reference design?
Each of the 16 boards on this page is a real design using the DRV2605LDGSR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DRV2605LDGSR use?
Most are built on Nordic nRF (12), ESP32 (2) and STM32 (1).
How big is a typical board using the DRV2605LDGSR?
The median is 24 × 42 mm, and 6% are two-layer designs.
What is the most popular open source board using the DRV2605LDGSR?
By GitHub stars, Kompic Mk1b by porupski, with 2 stars.
Can I simulate one of these boards using the DRV2605LDGSR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.