5 open source boards using the ENS210
Real designs built with the ENS210, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32AirCube
StuckAtPrototype
45 × 45 mm52 parts2LApache-2.0357
ESP32ESP-32-Dev-Board
Fred98246
25.4 × 62.7 mm27 parts4LMIT2
ESP32O-hareAir
Will946
53.1 × 57.7 mm43 parts2LMIT1
ESP32Carbon
Enderman8843
46.3 × 43.4 mm31 parts2LNo license0
Mess-Sense+USBC
unicab369
99.1 × 99.1 mm440 parts2LNo license0
The ENS210 in open source designs
The gallery holds 5 open source boards using the ENS210 from 5 GitHub repositories; a typical one measures about 46.3 × 57.7 mm and carries around 43 components.
80% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is AirCube by StuckAtPrototype.
Parts used alongside the ENS210
Microcontrollers on boards using the ENS210
What boards using the ENS210 are built for
ENS210: common questions
Where can I find a ENS210 reference design?
Each of the 5 boards on this page is a real design using the ENS210. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ENS210?
The AP2205, ENS161 and ESP32-H2-MINI-1 appear in the most repositories here.
Which microcontrollers do boards using the ENS210 use?
Most are built on ESP32 (4).
How big is a typical board using the ENS210?
The median is 46.3 × 57.7 mm, and 80% are two-layer designs.
What is the most popular open source board using the ENS210?
By GitHub stars, AirCube by StuckAtPrototype, with 357 stars.
Can I simulate one of these boards using the ENS210 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.