2 open source boards using the ENS161

Real designs built with the ENS161, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The ENS161 in open source designs

The gallery holds 2 open source boards using the ENS161 from 2 GitHub repositories; a typical one measures about 49.1 × 51.3 mm and carries around 48 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is AirCube by StuckAtPrototype.

Parts used alongside the ENS161

Microcontrollers on boards using the ENS161

What boards using the ENS161 are built for

ENS161: common questions

Where can I find a ENS161 reference design?

Each of the 2 boards on this page is a real design using the ENS161. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the ENS161?

The AP2205, ENS210 and ESP32-H2-MINI-1 appear in the most repositories here.

Which microcontrollers do boards using the ENS161 use?

Most are built on ESP32 (2).

How big is a typical board using the ENS161?

The median is 49.1 × 51.3 mm, and 100% are two-layer designs.

What is the most popular open source board using the ENS161?

By GitHub stars, AirCube by StuckAtPrototype, with 357 stars.

Can I simulate one of these boards using the ENS161 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part