5 open source boards using the LIS2MDLTR
Real designs built with the LIS2MDLTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Watch-DevKit-HW
ZSWatch
100 × 70 mm100 parts4LGPL-3.0187
Watch-HW
41 × 37.5 mm62 parts4LGPL-3.05
AVR/ArduinoEUPLA CONE CORE
PineConeMechatronics
76.2 × 54 mm95 parts2LCERN-OHL-P-2.01
STM32Gps tracker
candykingdom
84.9 × 74.8 mm92 parts4LApache-2.00
02 05 magnetometer LIS2MDLTR I2C
nyuad-space
22 × 22 mm12 parts2LNo license1
The LIS2MDLTR in open source designs
The gallery holds 5 open source boards using the LIS2MDLTR from 5 GitHub repositories; a typical one measures about 76.2 × 54 mm and carries around 92 components.
60% use four copper layers or more, and 80% carry an open source license.
The most starred is Watch-DevKit-HW by ZSWatch.
Parts used alongside the LIS2MDLTR
Microcontrollers on boards using the LIS2MDLTR
What boards using the LIS2MDLTR are built for
LIS2MDLTR: common questions
Where can I find a LIS2MDLTR reference design?
Each of the 5 boards on this page is a real design using the LIS2MDLTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LIS2MDLTR?
The APDS-9306-065, BMI270, BMP581, DRV2603RUNT and FAN5622SX appear in the most repositories here.
Which microcontrollers do boards using the LIS2MDLTR use?
Most are built on AVR/Arduino (1) and STM32 (1).
How big is a typical board using the LIS2MDLTR?
The median is 76.2 × 54 mm, and 40% are two-layer designs.
What is the most popular open source board using the LIS2MDLTR?
By GitHub stars, Watch-DevKit-HW by ZSWatch, with 187 stars.
Can I simulate one of these boards using the LIS2MDLTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.