3 open source boards using the LM1117IMP-3.3/NOPB

Real designs built with the LM1117IMP-3.3/NOPB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filtersOpen license only|Most starred Recently updated Most components

The LM1117IMP-3.3/NOPB in open source designs

The gallery holds 3 open source boards using the LM1117IMP-3.3/NOPB from 3 GitHub repositories; a typical one measures about 60 × 50 mm and carries around 86 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Openlst hw by OpenLST.

Parts used alongside the LM1117IMP-3.3/NOPB

What boards using the LM1117IMP-3.3/NOPB are built for

RF & radio 1

LM1117IMP-3.3/NOPB: common questions

Where can I find a LM1117IMP-3.3/NOPB reference design?

Each of the 3 boards on this page is a real design using the LM1117IMP-3.3/NOPB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LM1117IMP-3.3/NOPB?

The CC1110F32RHHR, FT5HNBPK27.0-T1, LT1086-3.6, RFFM6403SB and TLV803SDBZR appear in the most repositories here.

How big is a typical board using the LM1117IMP-3.3/NOPB?

The median is 60 × 50 mm, and 0% are two-layer designs.

What is the most popular open source board using the LM1117IMP-3.3/NOPB?

By GitHub stars, Openlst hw by OpenLST, with 37 stars.

Can I simulate one of these boards using the LM1117IMP-3.3/NOPB before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.