4 open source boards using the PCM1808PWR
Real designs built with the PCM1808PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Expansion board v4
naizhao
100 × 62 mm213 parts6LMIT11
RP2040/RP23504HPicoDSP
rheslip
20.3 × 110 mm71 parts2LNo license82
RP2040/RP2350Irl raver
hackclub
98 × 98 mm292 parts2LNo license7
RP2040/RP2350Pico 2HP Audio
70 × 30.3 mm57 parts2LNo license82
The PCM1808PWR in open source designs
The gallery holds 4 open source boards using the PCM1808PWR from 3 GitHub repositories; a typical one measures about 84 × 80 mm and carries around 142 components.
75% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is 4HPicoDSP by rheslip.
Microcontrollers on boards using the PCM1808PWR
What boards using the PCM1808PWR are built for
PCM1808PWR: common questions
Where can I find a PCM1808PWR reference design?
Each of the 4 boards on this page is a real design using the PCM1808PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the PCM1808PWR use?
Most are built on RP2040/RP2350 (4).
How big is a typical board using the PCM1808PWR?
The median is 84 × 80 mm, and 75% are two-layer designs.
What is the most popular open source board using the PCM1808PWR?
By GitHub stars, 4HPicoDSP by rheslip, with 82 stars.
Can I simulate one of these boards using the PCM1808PWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.