2 open source boards using the PLR135-T10

Real designs built with the PLR135-T10, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The PLR135-T10 in open source designs

The gallery holds 2 open source boards using the PLR135-T10 from 2 GitHub repositories; a typical one measures about 174 × 100 mm and carries around 436 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is FreeDSP-OCTAVIA by freeDSP.

Parts used alongside the PLR135-T10

What boards using the PLR135-T10 are built for

Audio 2

PLR135-T10: common questions

Where can I find a PLR135-T10 reference design?

Each of the 2 boards on this page is a real design using the PLR135-T10. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the PLR135-T10?

The 74LVC1G04, AMS1117-3.3, PLT133-T10W and TPS5430DDA appear in the most repositories here.

How big is a typical board using the PLR135-T10?

The median is 174 × 100 mm, and 0% are two-layer designs.

What is the most popular open source board using the PLR135-T10?

By GitHub stars, FreeDSP-OCTAVIA by freeDSP, with 19 stars.

Can I simulate one of these boards using the PLR135-T10 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.