16 open source boards using the STM32G431CBT6
Real designs built with the STM32G431CBT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32Moco-RD501
ziteh
50 × 50 mm114 parts4LCERN-OHL-P-2.022
STM32Esc rev b
iamdarshg
173.8 × 282.9 mm687 parts4LNo license2
STM32Glove daq
corneliusgruss
46 × 56 mm63 parts2LMIT2
STM32Phase2-module
udaravima
130 × 90 mm172 parts4LGPL-3.01
STM32FOC Control Boards
coopjz
81 × 80.9 mm106 parts4LMIT1
STM32APX DEVBOARD
Gabouin
23.4 × 40.3 mm26 parts2LMIT1
STM32CAN-BUS-FOC-Actuator
f1133
60 × 60 mm73 parts2LNo license0
STM32Moco-SC1
40 × 40 mm102 parts4LCERN-OHL-P-2.022
STM32Esc rev b.before hand power replicate
170 × 172.2 mm681 parts6LNo license2
STM32Phase1-module
120 × 80 mm136 parts4LGPL-3.01
STM32Moco-OD501
60 × 60 mm92 parts4LCERN-OHL-P-2.022
STM32Esc
246 × 296 mm599 parts4LNo license2
STM32Moco pg4
40 × 40 mm90 parts4LCERN-OHL-P-2.022
STM32Moco rc1
35 × 35 mm80 parts4LCERN-OHL-P-2.022
STM32Moco-OI401
40 × 40 mm65 parts2LCERN-OHL-P-2.022
The STM32G431CBT6 in open source designs
The gallery holds 16 open source boards using the STM32G431CBT6 from 8 GitHub repositories; a typical one measures about 55 × 60 mm and carries around 104 components.
69% use four copper layers or more, and 75% carry an open source license.
The most starred is AxxSolder by AxxAxx.
Parts used alongside the STM32G431CBT6
Microcontrollers on boards using the STM32G431CBT6
What boards using the STM32G431CBT6 are built for
STM32G431CBT6: common questions
Where can I find a STM32G431CBT6 reference design?
Each of the 16 boards on this page is a real design using the STM32G431CBT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32G431CBT6 use?
Most are built on STM32 (16).
How big is a typical board using the STM32G431CBT6?
The median is 55 × 60 mm, and 31% are two-layer designs.
What is the most popular open source board using the STM32G431CBT6?
By GitHub stars, AxxSolder by AxxAxx, with 1,687 stars.
Can I simulate one of these boards using the STM32G431CBT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.