4 open source boards using the SY8088
Real designs built with the SY8088, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Esp rust board
esp-rs
22.9 × 63.5 mm48 parts2LNo license647
Icepi sbc
cheyao
85 × 56 mm265 parts4LSHL-2.1342
ESP32ESP32-C3-DevKit-RUST-1
swayerloren
22.9 × 63.5 mm48 parts2LMIT8
ESP32ESP32-C3-DevKit-RUST-1
xutianq999
22.9 × 63.5 mm48 parts2LCERN-OHL-P-2.04
The SY8088 in open source designs
The gallery holds 4 open source boards using the SY8088 from 4 GitHub repositories; a typical one measures about 22.9 × 63.5 mm and carries around 48 components.
75% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Esp rust board by esp-rs.
Parts used alongside the SY8088
Microcontrollers on boards using the SY8088
What boards using the SY8088 are built for
SY8088: common questions
Where can I find a SY8088 reference design?
Each of the 4 boards on this page is a real design using the SY8088. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SY8088?
The ESP32-C3-MINI-1, ICM-42670-P, MCP73831T-2ACI/OT and SHTC3 appear in the most repositories here.
Which microcontrollers do boards using the SY8088 use?
Most are built on ESP32 (3).
How big is a typical board using the SY8088?
The median is 22.9 × 63.5 mm, and 75% are two-layer designs.
What is the most popular open source board using the SY8088?
By GitHub stars, Esp rust board by esp-rs, with 647 stars.
Can I simulate one of these boards using the SY8088 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.