6 open source boards using the SY8088

Real designs built with the SY8088, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the SY8088

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SY8088 connects to, and the resistors, capacitors and other passives placed on it.

  • The LX pin has a inductor on 6 of 6 designs, most often 2.2 µH.
  • The FB pin has a resistor to GND on 6 of 6 designs, most often 22.1 kΩ (then 22 kΩ).
  • The FB pin has a pull-up to 3.3V on 6 of 6 designs, most often 100 kΩ.
  • The FB pin has a capacitor to the supply on 6 of 6 designs, most often 22 pF (then 15 pF).
ENpin 1Connected to: Another IC 50% · 5V 17%
  • Pull-up to 5V on 83% · 10 kΩ (5)
GNDpin 2Connected to: GND 100%
LXpin 3Connected to: Signal 100%
  • Inductor on 100% · 2.2 µH (1)
INpin 4Connected to: 5V 100%
FBpin 5Connected to: Signal 100%
  • Resistor to GND on 100% · 22.1 kΩ (5), 22 kΩ (1)
  • Pull-up to 3.3V on 100% · 100 kΩ (6)
  • Capacitor to the supply on 100% · 22 pF (5), 15 pF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Esp rust board by esp-rs, Icepi sbc by cheyao, Mkey by MabezDev and Crimpdeq pcb by crimpdeq.

The SY8088 in open source designs

The gallery holds 6 open source boards using the SY8088 from 6 GitHub repositories; a typical one measures about 22.9 × 63.5 mm and carries around 48 components.

83% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Esp rust board by esp-rs.

Microcontrollers on boards using the SY8088

SY8088: common questions

Where can I find a SY8088 reference design?

Each of the 6 boards on this page is a real design using the SY8088. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SY8088 LX pin connected?

The LX pin has a inductor on 6 of 6 designs, most often 2.2 µH. Counted from the KiCad layouts of 6 open source designs using the SY8088.

What resistor goes on the SY8088 FB pin?

The FB pin has a resistor to GND on 6 of 6 designs, most often 22.1 kΩ (then 22 kΩ). Counted from the KiCad layouts of 6 open source designs using the SY8088.

What pull-up resistor is used on the SY8088 EN pin?

The EN pin has a pull-up to 5V on 5 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the SY8088.

What parts are used alongside the SY8088?

The ESP32-C3-MINI-1, MCP73831T-2ACI/OT, ICM-42670-P and SHTC3 appear in the most repositories here.

Which microcontrollers do boards using the SY8088 use?

Most are built on ESP32 (5).

How big is a typical board using the SY8088?

The median is 22.9 × 63.5 mm, and 83% are two-layer designs.

What is the most popular open source board using the SY8088?

By GitHub stars, Esp rust board by esp-rs, with 648 stars.

Can I simulate one of these boards using the SY8088 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part