8 open source boards using the TEENSY4.0
Real designs built with the TEENSY4.0, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXPRawWaves
SherpaModular
20 × 107 mm55 parts2LNo license26
NXPPrecharge
LSUTigerRacing
133 × 98 mm113 parts2LNo license7
NXPMotor controller
reubenstr
100 × 40 mm63 parts4LMIT51
NXPFault Latch 2
85.8 × 94.2 mm103 parts2LNo license7
NXPTEST
64 × 45.1 mm56 parts2LNo license7
NXPClarinoid3
thenfour
544.8 × 236.2 mm32 parts2LNo license4
NXPRML-Yianni-Revamp
72.6 × 32.5 mm40 parts2LNo license7
NXPRML HVI
81 × 34 mm39 parts2LNo license7
The TEENSY4.0 in open source designs
The gallery holds 8 open source boards using the TEENSY4.0 from 4 GitHub repositories; a typical one measures about 83.4 × 69.7 mm and carries around 56 components.
88% are two-layer designs, the rest use four layers or more, and 13% carry an open source license.
The most starred is Motor controller by reubenstr.
Microcontrollers on boards using the TEENSY4.0
What boards using the TEENSY4.0 are built for
TEENSY4.0: common questions
Where can I find a TEENSY4.0 reference design?
Each of the 8 boards on this page is a real design using the TEENSY4.0. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TEENSY4.0 use?
Most are built on NXP (8).
How big is a typical board using the TEENSY4.0?
The median is 83.4 × 69.7 mm, and 88% are two-layer designs.
What is the most popular open source board using the TEENSY4.0?
By GitHub stars, Motor controller by reubenstr, with 51 stars.
Can I simulate one of these boards using the TEENSY4.0 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.