5 open source boards using the TPS5430DDA
Real designs built with the TPS5430DDA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32SmartSPin2k
doudar
57.2 × 60.3 mm79 parts2LGPL-2.0283
STM32Explorer
anyshake
100 × 100 mm244 parts2LCustom license95
FreeDSP-OCTAVIA
freeDSP
178 × 99 mm505 parts4LCC-BY-SA-4.019
ESP32SmartSPin2k
189.5 × 204.9 mm79 parts2LGPL-2.0283
RP2040/RP2350Output
CrashOverride85
60.3 × 139.1 mm116 parts2LGPL-3.0112
The TPS5430DDA in open source designs
The gallery holds 5 open source boards using the TPS5430DDA from 4 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 116 components.
80% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is SmartSPin2k PCB by doudar.
Parts used alongside the TPS5430DDA
Microcontrollers on boards using the TPS5430DDA
What boards using the TPS5430DDA are built for
TPS5430DDA: common questions
Where can I find a TPS5430DDA reference design?
Each of the 5 boards on this page is a real design using the TPS5430DDA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS5430DDA use?
Most are built on ESP32 (2), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the TPS5430DDA?
The median is 100 × 100 mm, and 80% are two-layer designs.
What is the most popular open source board using the TPS5430DDA?
By GitHub stars, SmartSPin2k PCB by doudar, with 283 stars.
Can I simulate one of these boards using the TPS5430DDA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.