4 open source boards using the XC6206P182MR
Real designs built with the XC6206P182MR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Elec RPI Robot HAT
pollen-robotics
65 × 30.9 mm122 parts4LApache-2.080
RP2040/RP2350Digits
justinlindh
61.9 × 76.2 mm74 parts2LAGPL-3.04
ESP32Kompic Mk1b
porupski
44.5 × 50.6 mm121 parts4LGPL-3.02
ESP32Kompic Mk1
44.5 × 50.6 mm119 parts4LGPL-3.02
The XC6206P182MR in open source designs
The gallery holds 4 open source boards using the XC6206P182MR from 3 GitHub repositories; a typical one measures about 53.2 × 50.6 mm and carries around 120 components.
75% use four copper layers or more, and 100% carry an open source license.
The most starred is Elec RPI Robot HAT by pollen-robotics.
Parts used alongside the XC6206P182MR
Microcontrollers on boards using the XC6206P182MR
What boards using the XC6206P182MR are built for
XC6206P182MR: common questions
Where can I find a XC6206P182MR reference design?
Each of the 4 boards on this page is a real design using the XC6206P182MR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the XC6206P182MR use?
Most are built on ESP32 (2) and RP2040/RP2350 (1).
How big is a typical board using the XC6206P182MR?
The median is 53.2 × 50.6 mm, and 25% are two-layer designs.
What is the most popular open source board using the XC6206P182MR?
By GitHub stars, Elec RPI Robot HAT by pollen-robotics, with 80 stars.
Can I simulate one of these boards using the XC6206P182MR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.