5 open source boards using the XL1509-5.0E1
Real designs built with the XL1509-5.0E1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32FOC
nordstream3
75.2 × 99.5 mm238 parts4LNo license80
ESP8266Tesla-Front-Drive-Unit
damienmaguire
190.5 × 176.6 mm196 parts4LNo license57
STM32Panel board
ReflexCreations
281 × 195 mm305 parts4LMIT12
STM32FOC KING
b264
75.2 × 99.5 mm238 parts4LNo license3
Water sensor cutoff
cyberknet
70 × 70 mm34 parts2LCC-BY-NC-4.00
The XL1509-5.0E1 in open source designs
The gallery holds 5 open source boards using the XL1509-5.0E1 from 5 GitHub repositories; a typical one measures about 75.2 × 99.5 mm and carries around 238 components.
80% use four copper layers or more, and 20% carry an open source license.
The most starred is FOC by nordstream3.
Parts used alongside the XL1509-5.0E1
What boards using the XL1509-5.0E1 are built for
XL1509-5.0E1: common questions
Where can I find a XL1509-5.0E1 reference design?
Each of the 5 boards on this page is a real design using the XL1509-5.0E1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the XL1509-5.0E1?
The AMS1117-3.3, BMI270, IRS21867S, MS8311 and STM32F401CCU6_Blackpill appear in the most repositories here.
Which microcontrollers do boards using the XL1509-5.0E1 use?
Most are built on STM32 (3) and ESP8266 (1).
How big is a typical board using the XL1509-5.0E1?
The median is 75.2 × 99.5 mm, and 20% are two-layer designs.
What is the most popular open source board using the XL1509-5.0E1?
By GitHub stars, FOC by nordstream3, with 80 stars.
Can I simulate one of these boards using the XL1509-5.0E1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.