8 open source boards using the 24Cxx

Real designs built with the 24Cxx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the 24Cxx

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 24Cxx connects to, and the resistors, capacitors and other passives placed on it.

  • The SDA pin has a series resistor on 5 of 6 designs, most often 470 Ω.
  • The SCL pin has a series resistor on 5 of 6 designs, most often 470 Ω.
  • The A0 pin is tied to GND on 5 of 6 designs.
  • The A1 pin is tied to GND on 5 of 6 designs.
A0pin 1Connected to: GND 83% · a signal 17%
A1pin 2Connected to: GND 83% · a signal 17%
A2pin 3Connected to: GND 83% · a signal 17%
GNDpin 4Connected to: GND 83% · a signal 17%
SDApin 5Connected to: 74HC125 83%, PIC_18_PINS 83%, PIC_8_PINS 83%
  • Series resistor on 83% · 470 Ω (5)
SCLpin 6Connected to: A connector 100%, PIC_18_PINS 83%, PIC_8_PINS 83%
  • Series resistor on 83% · 470 Ω (5)
WPpin 7Connected to: Not connected 83% · a signal 17%
VCCpin 8Connected to: VCC_PIC 83% · a signal 17%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SERIAL PIC PROGRAMMER by claynicholson, I2c cartridge by 89Mods, SERIAL PIC PROGRAMMER by palginpav and Flat hierarchy by circuitly.

The 24Cxx in open source designs

The gallery holds 8 open source boards using the 24Cxx from 6 GitHub repositories; a typical one measures about 160 × 99.1 mm and carries around 55 components.

100% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.

The most starred is SERIAL PIC PROGRAMMER by claynicholson.

Microcontrollers on boards using the 24Cxx

What boards using the 24Cxx are built for

24Cxx: common questions

Where can I find a 24Cxx reference design?

Each of the 8 boards on this page is a real design using the 24Cxx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the 24Cxx SDA pin?

The SDA pin has a series resistor on 5 of 6 designs, most often 470 Ω. Counted from the KiCad layouts of 6 open source designs using the 24Cxx.

What resistor goes on the 24Cxx SCL pin?

The SCL pin has a series resistor on 5 of 6 designs, most often 470 Ω. Counted from the KiCad layouts of 6 open source designs using the 24Cxx.

How is the 24Cxx A0 pin connected?

The A0 pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 24Cxx.

What parts are used alongside the 24Cxx?

The 74HC125, 7805, LT1373, PIC_18_PINS and PIC_8_PINS appear in the most repositories here.

Which microcontrollers do boards using the 24Cxx use?

Most are built on PIC (3).

How big is a typical board using the 24Cxx?

The median is 160 × 99.1 mm, and 100% are two-layer designs.

What is the most popular open source board using the 24Cxx?

By GitHub stars, SERIAL PIC PROGRAMMER by claynicholson, with 102 stars.

Can I simulate one of these boards using the 24Cxx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part