9 open source boards using the LT1373
Real designs built with the LT1373, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
SERIAL PIC PROGRAMMER
zymaxcii
160 × 99.1 mm55 partsNo license1PIC
SERIAL PIC PROGRAMMER
thisis-romar
160 × 99.1 mm55 parts2LNo license0SERIAL PIC PROGRAMMER
Mhamednoui
160 × 99.1 mm55 parts2LNo license0SERIAL PIC PROGRAMMER
palginpav
160 × 99.1 mm55 parts2LApache-2.01Flat hierarchy
circuitly
160 × 99.1 mm57 parts2LNo license0Pic programmer
circuitly
160 × 99.1 mm56 parts2LNo license0SERIAL PIC PROGRAMMER
claynicholson
160 × 99.1 mm55 parts2LMIT102PIC
Flat hierarchy
nickradfc
160 × 99.1 mm57 parts2LNo license0PIC
Pic programmer
nickradfc
160 × 99.1 mm55 parts2LNo license0
How designs wire the LT1373
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the LT1373 connects to, and the resistors, capacitors and other passives placed on it.
- The VC_1 pin has a series resistor on 7 of 7 designs, most often 5.1 kΩ.
- The VSW_8 pin has a inductor on 7 of 7 designs, most often 22 µH.
- The VC_1 pin has a capacitor to GND on 7 of 7 designs.
- The FB-_3 pin is left unconnected on 7 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VC_1pin 1 | Connected to: Signal 100% |
|
| FB-_3pin 3 | Connected to: Not connected 100% | — |
| S/S_4pin 4 | Connected to: Not connected 100% | — |
| VIN_5pin 5 | Connected to: VCC 100% | — |
| GND_S_6pin 6 | Connected to: GND 100% | — |
| GND_7pin 7 | Connected to: GND 100% | — |
| VSW_8pin 8 | Connected to: Signal 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SERIAL PIC PROGRAMMER by claynicholson, SERIAL PIC PROGRAMMER by palginpav, SERIAL PIC PROGRAMMER by zymaxcii and Flat hierarchy by circuitly.
The LT1373 in open source designs
The gallery holds 9 open source boards using the LT1373 from 7 GitHub repositories; a typical one measures about 160 × 99.1 mm and carries around 55 components.
100% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.
The most starred is SERIAL PIC PROGRAMMER by claynicholson.
Parts used alongside the LT1373
Microcontrollers on boards using the LT1373
What boards using the LT1373 are built for
LT1373: common questions
Where can I find a LT1373 reference design?
Each of the 9 boards on this page is a real design using the LT1373. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the LT1373 VC_1 pin?
The VC_1 pin has a series resistor on 7 of 7 designs, most often 5.1 kΩ. Counted from the KiCad layouts of 7 open source designs using the LT1373.
How is the LT1373 VSW_8 pin connected?
The VSW_8 pin has a inductor on 7 of 7 designs, most often 22 µH. Counted from the KiCad layouts of 7 open source designs using the LT1373.
How is the LT1373 FB-_3 pin connected?
The FB-_3 pin is left unconnected on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the LT1373.
What parts are used alongside the LT1373?
The PIC_18_PINS, PIC_8_PINS, 74HC125, 7805 and 24Cxx appear in the most repositories here.
Which microcontrollers do boards using the LT1373 use?
Most are built on PIC (3).
How big is a typical board using the LT1373?
The median is 160 × 99.1 mm, and 100% are two-layer designs.
What is the most popular open source board using the LT1373?
By GitHub stars, SERIAL PIC PROGRAMMER by claynicholson, with 102 stars.
Can I simulate one of these boards using the LT1373 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.