6 open source boards using the 27C160
Real designs built with the 27C160, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
The Wozblaster Reloaded
cristianoag
100 × 64.8 mm46 parts2LNo license10PIC
SNES-LoROM-Cartridge wo-Save
pdaehne
102 × 58 mm12 parts2LCC-BY-NC-4.06Rom extender
reinauer
37.3 × 60.7 mm5 parts2LNo license31PIC
SNES Basic UV 1-1
MouseBiteLabs
110.2 × 77.8 mm40 parts2LCC-BY-SA-4.06827c160
keirf
47 × 99.7 mm6 parts2LCC0-1.010727c160-2up
keirf
96.5 × 99.7 mm6 parts2LCC0-1.0107
How designs wire the 27C160
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 27C160 connects to, and the resistors, capacitors and other passives placed on it.
- The D8 pin is left unconnected on 3 of 5 designs (a signal on 2).
- The D9 pin is left unconnected on 3 of 5 designs (a signal on 2).
- The D10 pin is left unconnected on 3 of 5 designs (a signal on 2).
- The D11 pin is left unconnected on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A18pin 1 | Connected to: 27C160 40%, a connector 40% · not connected 20% |
|
| GNDpin 12, 31 | Connected to: GND 80% · a signal 20% | — |
| D8pin 15 | Connected to: Not connected 60% · a signal 40% | — |
| D9pin 17 | Connected to: Not connected 60% · a signal 40% | — |
| D10pin 19 | Connected to: Not connected 60% · a signal 40% | — |
| D11pin 21 | Connected to: Not connected 60% · a signal 40% | — |
| VCCpin 22 | Connected to: VCC 80% · a signal 20% | — |
| D12pin 24 | Connected to: Not connected 60% · a signal 40% | — |
| D13pin 26 | Connected to: Not connected 60% · a signal 40% | — |
| D14pin 28 | Connected to: Not connected 60% · a signal 40% | — |
| A19pin 42 | Connected to: 27C160 40% |
|
30 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 27c160 by keirf, SNES Basic UV 1-1 by MouseBiteLabs, Rom extender by reinauer and The Wozblaster Reloaded by cristianoag.
The 27C160 in open source designs
The gallery holds 6 open source boards using the 27C160 from 5 GitHub repositories; a typical one measures about 98.3 × 71.3 mm and carries around 9 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is 27c160-2up by keirf.
Microcontrollers on boards using the 27C160
What boards using the 27C160 are built for
27C160: common questions
Where can I find a 27C160 reference design?
Each of the 6 boards on this page is a real design using the 27C160. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 27C160 D8 pin connected?
The D8 pin is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the 27C160.
How is the 27C160 D9 pin connected?
The D9 pin is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the 27C160.
How is the 27C160 D10 pin connected?
The D10 pin is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the 27C160.
Which microcontrollers do boards using the 27C160 use?
Most are built on PIC (2).
How big is a typical board using the 27C160?
The median is 98.3 × 71.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the 27C160?
By GitHub stars, 27c160-2up by keirf, with 107 stars.
Can I simulate one of these boards using the 27C160 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.