18 open source boards using the 4504
Real designs built with the 4504, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Useq1
Emute-Lab-Instruments
40.6 × 108 mm163 parts2LNo license44C6021light
GBert
100 × 50 mm74 parts2LNo license36STM32
Printer otter
Jana-Marie
36 × 32 mm48 parts2LNo license7STM32
Sensored-3-P-BLDC-Closed-Loop-V1
g-rahul
100 × 100 mm114 parts2LNo license5Cnc mill prototype
itadinanta
102.1 × 119.4 mm79 parts2LNo license4STM32
Stm32-midi to cv
peterzimon
39.9 × 99.9 mm45 parts2LNo license2ESP8266
Seven segments clock
erickpires
337 × 76.1 mm125 parts2LNo license0Drv E F
PabloSGomez50
192.3 × 116.4 mm111 parts2LNo license0AVR/Arduino
Nixie clock
pimborman
189 × 55 mm66 parts4LNo license0PIC
All in One Railroad Interface
GBert
85 × 56.5 mm151 parts2LNo license99PIC
BPi-CAN
GBert
100 × 100 mm146 parts2LNo license99Useq
Emute-Lab-Instruments
40.6 × 108 mm29 parts2LNo license44S88iso
GBert
70 × 50 mm29 parts2LNo license36C8051-test
GBert
48.3 × 54.6 mm13 parts2LNo license36NXP
Principal V3
PCBrs
70.8 × 87.9 mm74 parts2LNo license0RP2040/RP2350
IC MCU
PabloSGomez50
60 × 50 mm10 parts2LNo license0NXP
PCB Principal V4
PCBrs
82.8 × 56 mm56 parts2LNo license0Relay ctrl compressor cabinet
ograsdijk
81.9 × 52.1 mm17 parts2LNo license1
How designs wire the 4504
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the 4504 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 6 of 12 designs, most often 100 nF.
- The VDD pin has a decoupling capacitor on 6 of 11 designs, most often 100 nF.
- The SELECT pin is tied to GND on 7 of 11 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCpin 1 | Connected to: 3.3V 100% |
|
| VSSpin 8 | Connected to: GND 100% | — |
| SELECTpin 13 | Connected to: GND 64% · a signal 18% | — |
| VDDpin 16 | Connected to: 5V 91% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include All in One Railroad Interface by GBert, Useq by Emute-Lab-Instruments, C6021light by GBert and Printer otter by Jana-Marie.
The 4504 in open source designs
The gallery holds 18 open source boards using the 4504 from 12 GitHub repositories; a typical one measures about 82.4 × 66.3 mm and carries around 70 components.
94% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is All in One Railroad Interface by GBert.
Parts used alongside the 4504
Microcontrollers on boards using the 4504
What boards using the 4504 are built for
4504: common questions
Where can I find a 4504 reference design?
Each of the 18 boards on this page is a real design using the 4504. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 4504 VCC pin?
The VCC pin has a decoupling capacitor on 6 of 12 designs, most often 100 nF. Counted from the KiCad layouts of 12 open source designs using the 4504.
What decoupling capacitors do designs use on the 4504 VDD pin?
The VDD pin has a decoupling capacitor on 6 of 11 designs, most often 100 nF. Counted from the KiCad layouts of 12 open source designs using the 4504.
How is the 4504 SELECT pin connected?
The SELECT pin is tied to GND on 7 of 11 designs (a signal on 2). Counted from the KiCad layouts of 12 open source designs using the 4504.
What parts are used alongside the 4504?
The L7805, LM358, LM393 and LM7805_TO220 appear in the most repositories here.
Which microcontrollers do boards using the 4504 use?
Most are built on STM32 (3), NXP (2), PIC (2) and RP2040/RP2350 (2).
How big is a typical board using the 4504?
The median is 82.4 × 66.3 mm, and 94% are two-layer designs.
What is the most popular open source board using the 4504?
By GitHub stars, All in One Railroad Interface by GBert, with 99 stars.
Can I simulate one of these boards using the 4504 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.