4 open source boards using the 6850

Real designs built with the 6850, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The 6850 in open source designs

The gallery holds 4 open source boards using the 6850 from 3 GitHub repositories; a typical one measures about 280 × 174.1 mm and carries around 96 components.

50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is 68000 by jefftranter.

6850: common questions

Where can I find a 6850 reference design?

Each of the 4 boards on this page is a real design using the 6850. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 6850?

The 74LS00, 74LS04, 74LS08, 74LS138 and 74LS20 appear in the most repositories here.

How big is a typical board using the 6850?

The median is 280 × 174.1 mm, and 50% are two-layer designs.

What is the most popular open source board using the 6850?

By GitHub stars, 68000 by jefftranter, with 132 stars.

Can I simulate one of these boards using the 6850 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part