11 open source boards using the 74AHC1G02
Real designs built with the 74AHC1G02, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
BuoyPower
diyaquanauts
56 × 65.5 mm34 parts2LNo license1AVR/Arduino
RTB C11
git4dcc
160.3 × 71.7 mm112 parts2LApache-2.00GP8B
JonathSpirit
133 × 93 mm105 parts4LCERN-OHL-W-2.00ESP32
Mgc esp32
0x007E
33 × 48.9 mm32 parts2LCC-BY-NC-4.00Hellen1-vr discrete
andreika-git
15.2 × 9.8 mm48 parts4LNo license36Operacake
greearb
120 × 75 mm152 partsGPL-2.01Operacake
JensLiu
120 × 75 mm152 partsGPL-2.01Operacake
deepin-community
120 × 75 mm152 partsGPL-2.008-bit register
jerry-kerenzikov
100 × 51.9 mm65 parts4LCERN-OHL-S-2.00Instruction register
jerry-kerenzikov
100 × 31.6 mm27 parts4LCERN-OHL-S-2.00RML
LSUTigerRacing
85 × 50 mm25 parts4LNo license7
How designs wire the 74AHC1G02
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 74AHC1G02 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 10 nF).
- Pin 1 has a pull-up to VCC on 6 of 10 designs, most often 10 kΩ (then 4.7 kΩ).
- Pin 2 has a pull-up to VCC on 4 of 10 designs, most often 10 kΩ (then 4.7 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: 74AHC1G08 30%, 74LVC1G58 30%, PCA9557 30% |
|
| Pin 2 | Connected to: 74AHC1G08 30%, 74LVC1G58 30%, PCA9557 30% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| Pin 4 | Connected to: SKY13322 30% |
|
| VCCpin 5 | Connected to: VCC 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hellen1-vr discrete by andreika-git, RML by LSUTigerRacing, BuoyPower by diyaquanauts and Operacake by greearb.
The 74AHC1G02 in open source designs
The gallery holds 11 open source boards using the 74AHC1G02 from 10 GitHub repositories; a typical one measures about 100 × 65.5 mm and carries around 65 components.
63% use four copper layers or more, and 64% carry an open source license.
The most starred is Hellen1-vr discrete by andreika-git.
Parts used alongside the 74AHC1G02
Microcontrollers on boards using the 74AHC1G02
What boards using the 74AHC1G02 are built for
74AHC1G02: common questions
Where can I find a 74AHC1G02 reference design?
Each of the 11 boards on this page is a real design using the 74AHC1G02. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74AHC1G02 VCC pin?
The VCC pin has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 10 open source designs using the 74AHC1G02.
What pull-up resistor is used on the 74AHC1G02 pin 1?
Pin 1 has a pull-up to VCC on 6 of 10 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 10 open source designs using the 74AHC1G02.
What pull-up resistor is used on the 74AHC1G02 pin 2?
Pin 2 has a pull-up to VCC on 4 of 10 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 10 open source designs using the 74AHC1G02.
What parts are used alongside the 74AHC1G02?
The 74AHC1G08, 74LVC1G19, 74LVC1G58, MASWSS0129 and PCA9557 appear in the most repositories here.
Which microcontrollers do boards using the 74AHC1G02 use?
Most are built on AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the 74AHC1G02?
The median is 100 × 65.5 mm, and 38% are two-layer designs.
What is the most popular open source board using the 74AHC1G02?
By GitHub stars, Hellen1-vr discrete by andreika-git, with 36 stars.
Can I simulate one of these boards using the 74AHC1G02 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.