9 open source boards using the SKY13322
Real designs built with the SKY13322, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Operacake
Meteora-Z
120 × 75 mm152 partsNo license0Operacake
Charmve
120 × 75 mm152 partsBSD-2-Clause354Operacake
alexmfz
120 × 75 mm152 partsGPL-2.03Operacake
greearb
120 × 75 mm152 partsGPL-2.01Operacake
JensLiu
120 × 75 mm152 partsGPL-2.01Operacake
2ftg
120 × 75 mm152 partsGPL-2.00Operacake
deepin-community
120 × 75 mm152 partsGPL-2.00Operacake
Toysoft
120 × 75 mm152 partsGPL-2.00Rf switch sp4t
greatscottgadgets
164 × 25 mm73 parts4LGPL-2.021
How designs wire the SKY13322
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the SKY13322 connects to, and the resistors, capacitors and other passives placed on it.
- The J2 pin has a series capacitor on 9 of 9 designs, most often 100 nF.
- The V2 pin has a capacitor to GND on 9 of 9 designs, most often 33 pF.
- The V1 pin has a capacitor to GND on 9 of 9 designs, most often 33 pF.
- The J1 pin has a series capacitor on 9 of 9 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 0 | Connected to: GND 100% | — |
| J2pin 1 | Connected to: Signal 100% |
|
| V2pin 2 | Connected to: MGA-81563 56%, 74LVC1G58 33% |
|
| NCpin 3 | Connected to: Not connected 100% | — |
| V1pin 4 | Connected to: SKY13350 56%, 74LVC1G58 33% |
|
| J1pin 5 | Connected to: Signal 100% |
|
| J3pin 6 | Connected to: Signal 100% |
|
| V3pin 7 | Connected to: SKY13317 56%, 74AHC1G02 33% |
|
| RFCpin 8 | Connected to: Signal 100% |
|
| V4pin 9 | Connected to: GSG-74HC04 56%, 74AHC1G08 33% |
|
| J4pin 10 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Operacake by Charmve, Rf switch sp4t by greatscottgadgets, Operacake by alexmfz and Operacake by greearb.
The SKY13322 in open source designs
The gallery holds 9 open source boards using the SKY13322 from 9 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 152 components.
100% use four copper layers or more, and 89% carry an open source license.
The most starred is Operacake by Charmve.
Parts used alongside the SKY13322
What boards using the SKY13322 are built for
SKY13322: common questions
Where can I find a SKY13322 reference design?
Each of the 9 boards on this page is a real design using the SKY13322. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SKY13322 J2 pin connected?
The J2 pin has a series capacitor on 9 of 9 designs, most often 100 nF. Counted from the KiCad layouts of 9 open source designs using the SKY13322.
How is the SKY13322 V2 pin connected?
The V2 pin has a capacitor to GND on 9 of 9 designs, most often 33 pF. Counted from the KiCad layouts of 9 open source designs using the SKY13322.
How is the SKY13322 V1 pin connected?
The V1 pin has a capacitor to GND on 9 of 9 designs, most often 33 pF. Counted from the KiCad layouts of 9 open source designs using the SKY13322.
What parts are used alongside the SKY13322?
The 74AHC1G08, GSG-74HC04, GSG-74HC08, MGA-81563 and RFFC5072 appear in the most repositories here.
How big is a typical board using the SKY13322?
The median is 120 × 75 mm, and 0% are two-layer designs.
What is the most popular open source board using the SKY13322?
By GitHub stars, Operacake by Charmve, with 354 stars.
Can I simulate one of these boards using the SKY13322 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.