7 open source boards using the 74HC00PW
Real designs built with the 74HC00PW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Jetson Xavier/Orin NX + PX4 Board
PranavNedunghat
139 × 57.4 mm478 parts8LApache-2.00ESP32
Capable jetson carrier
CapableRobot
100 × 55 mm344 parts6LApache-2.00STM32
V1.3
PranavNedunghat
66 × 8.8 mm475 parts8LApache-2.00ESP32
CRMHJN capable carrier
CapableRobot
122 × 77 mm344 parts6LApache-2.00STM32
V1.1 version control
PranavNedunghat
66 × 8.8 mm473 parts8LApache-2.00STM32
V1.1 XT30 version
PranavNedunghat
4.5 × 57.9 mm473 parts8LApache-2.00STM32
V1.2
PranavNedunghat
66 × 8.8 mm471 parts8LApache-2.00
The 74HC00PW in open source designs
The gallery holds 7 open source boards using the 74HC00PW from 2 GitHub repositories; a typical one measures about 66 × 55 mm and carries around 473 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Jetson Xavier/Orin NX + PX4 Board by PranavNedunghat.
Parts used alongside the 74HC00PW
What boards using the 74HC00PW are built for
74HC00PW: common questions
Where can I find a 74HC00PW reference design?
Each of the 7 boards on this page is a real design using the 74HC00PW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 74HC00PW?
The AT24CS01-ST, PCA9547BS,118, SN74LVC1G126DCKR, SN74LXC1T45DBVR and TPS7A0518PDBVT appear in the most repositories here.
Which microcontrollers do boards using the 74HC00PW use?
Most are built on STM32 (5) and ESP32 (2).
How big is a typical board using the 74HC00PW?
The median is 66 × 55 mm, and 0% are two-layer designs.
What is the most popular open source board using the 74HC00PW?
By GitHub stars, Jetson Xavier/Orin NX + PX4 Board by PranavNedunghat, with 0 stars.
Can I simulate one of these boards using the 74HC00PW before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.