8 open source boards using the PCA9547BS,118
Real designs built with the PCA9547BS,118, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Jetson-AI-Cam-CopperPilot
CopperPilot
78 × 55 mm268 parts8LCERN-OHL-P-2.09STM32
Jetson Xavier/Orin NX + PX4 Board
PranavNedunghat
139 × 57.4 mm478 parts8LApache-2.00ESP32
Capable jetson carrier
CapableRobot
100 × 55 mm344 parts6LApache-2.00STM32
V1.3
PranavNedunghat
66 × 8.8 mm475 parts8LApache-2.00ESP32
CRMHJN capable carrier
CapableRobot
122 × 77 mm344 parts6LApache-2.00STM32
V1.1 version control
PranavNedunghat
66 × 8.8 mm473 parts8LApache-2.00STM32
V1.1 XT30 version
PranavNedunghat
4.5 × 57.9 mm473 parts8LApache-2.00STM32
V1.2
PranavNedunghat
66 × 8.8 mm471 parts8LApache-2.00
The PCA9547BS,118 in open source designs
The gallery holds 8 open source boards using the PCA9547BS,118 from 3 GitHub repositories; a typical one measures about 72 × 55 mm and carries around 472 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Jetson-AI-Cam-CopperPilot by CopperPilot.
Parts used alongside the PCA9547BS,118
What boards using the PCA9547BS,118 are built for
PCA9547BS,118: common questions
Where can I find a PCA9547BS,118 reference design?
Each of the 8 boards on this page is a real design using the PCA9547BS,118. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the PCA9547BS,118?
The AT24CS01-ST, SN74LVC1G126DCKR, SN74LXC1T45DBVR, TPS7A0518PDBVT and 74HC00PW appear in the most repositories here.
Which microcontrollers do boards using the PCA9547BS,118 use?
Most are built on STM32 (5) and ESP32 (2).
How big is a typical board using the PCA9547BS,118?
The median is 72 × 55 mm, and 0% are two-layer designs.
What is the most popular open source board using the PCA9547BS,118?
By GitHub stars, Jetson-AI-Cam-CopperPilot by CopperPilot, with 9 stars.
Can I simulate one of these boards using the PCA9547BS,118 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.