5 open source boards using the 74HC165D,653

Real designs built with the 74HC165D,653, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the 74HC165D,653

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74HC165D,653 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
  • The CE pin is tied to GND on 4 of 5 designs.
  • The PL pin has a series resistor on 2 of 5 designs, most often 300 Ω.
  • The PL pin has a pull-up to 3.3V on 2 of 5 designs, most often 10 kΩ.
PLpin 1Connected to: A connector 80%, 74HC165D,653 60%
  • Series resistor on 40% · 300 Ω (2)
  • Pull-up to 3.3V on 40% · 10 kΩ (2)
CPpin 2Connected to: 74HC165D,653 60%, a connector 60%, 74HC595D,118 40%
  • Resistor to GND on 40% · 10 kΩ (2)
D4pin 3Connected to: Signal 100%
  • Pull-up to 3.3V on 40% · 4.12 kΩ (1), 10 kΩ (1)
  • Series resistor on 40% · 1 MΩ (1)
D5pin 4Connected to: Signal 80% · not connected 20%
  • Pull-up to 3.3V on 40% · 4.12 kΩ (1), 10 kΩ (1)
  • Series resistor on 40% · 1 MΩ (1)
D6pin 5Connected to: Signal 80% · not connected 20%
  • Pull-up to 3.3V on 40% · 4.12 kΩ (1), 10 kΩ (1)
  • Series resistor on 40% · 1 MΩ (1)
D7pin 6Connected to: Signal 80% · not connected 20%
  • Pull-up to 3.3V on 40% · 4.12 kΩ (1), 10 kΩ (1)
  • Series resistor on 40% · 1 MΩ (1)
GNDpin 8Connected to: GND 100%
D0pin 11Connected to: Signal 80% · not connected 20%
  • Pull-up to 3.3V on 40% · 4.12 kΩ (1), 10 kΩ (1)
  • Series resistor on 40% · 1 MΩ (1)
D1pin 12Connected to: Signal 100%
  • Pull-up to 3.3V on 40% · 4.12 kΩ (1), 10 kΩ (1)
  • Resistor to GND on 40% · 100 kΩ (2)
  • Series resistor on 40% · 1 MΩ (1)
D2pin 13Connected to: Signal 80% · not connected 20%
  • Pull-up to 3.3V on 40% · 4.12 kΩ (1), 10 kΩ (1)
  • Series resistor on 40% · 1 MΩ (1)
D3pin 14Connected to: Signal 80% · not connected 20%
  • Pull-up to 3.3V on 40% · 4.12 kΩ (1), 10 kΩ (1)
  • Series resistor on 40% · 1 MΩ (1)
CEpin 15Connected to: GND 80% · a signal 20%
VCCpin 16Connected to: 3.3V 60% · a signal 40%
  • Decoupling capacitor on 100% · 100 nF (3), 1 µF (2)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Rioctrl shiftio by festlv, Solderbit gamepad by devices-lab, Pro2-kicad tutorial by devices-lab and Universal-Poofer-Control by NOVA-Cluster.

The 74HC165D,653 in open source designs

The gallery holds 5 open source boards using the 74HC165D,653 from 5 GitHub repositories; a typical one measures about 114 × 100 mm and carries around 137 components.

80% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is Rioctrl shiftio by festlv.

Parts used alongside the 74HC165D,653

Microcontrollers on boards using the 74HC165D,653

What boards using the 74HC165D,653 are built for

74HC165D,653: common questions

Where can I find a 74HC165D,653 reference design?

Each of the 5 boards on this page is a real design using the 74HC165D,653. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74HC165D,653 VCC pin?

The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the 74HC165D,653.

How is the 74HC165D,653 CE pin connected?

The CE pin is tied to GND on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74HC165D,653.

What resistor goes on the 74HC165D,653 PL pin?

The PL pin has a series resistor on 2 of 5 designs, most often 300 Ω. Counted from the KiCad layouts of 5 open source designs using the 74HC165D,653.

Which microcontrollers do boards using the 74HC165D,653 use?

Most are built on ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the 74HC165D,653?

The median is 114 × 100 mm, and 80% are two-layer designs.

What is the most popular open source board using the 74HC165D,653?

By GitHub stars, Rioctrl shiftio by festlv, with 16 stars.

Can I simulate one of these boards using the 74HC165D,653 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part