16 open source boards using the 74HC595D,118
Real designs built with the 74HC595D,118, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Le oeuf
eggsworks
215.1 × 81.2 mm75 parts2LCERN-OHL-S-2.067Driver
nathdobson
98 × 34 mm30 parts4LCERN-OHL-W-2.030IMX6 Demo Board from REF
ts-manuel
80 × 70 mm465 parts6LGPL-3.010TI MSP430/CC
E cribbage
tchristle
304.8 × 100.3 mm577 parts2LNo license1ESP32
Lfp
maxakash
216 × 146 mm831 parts2LNo license0Raspberry Pi
Iasis
hydazz
130 × 100 mm636 parts6LApache-2.00ESP32
Universal-Poofer-Control
NOVA-Cluster
200 × 160 mm577 parts4LNo license0RP2040/RP2350
UCNC Pi Board
staskaaa-netizen
200 × 150 mm314 parts2LNo license0Raspberry Pi
Solartron 7075 USB interface (SKiDL)
cHemingway
112 × 44 mm93 parts4LNo license0Quiz remote
nahhao74
52 × 90 mm66 parts2LMIT0Rioctrl shiftio
festlv
100 × 100 mm137 parts2LCERN-OHL-S-2.016I.MX6 Demo Board
ts-manuel
80 × 70 mm455 parts6LGPL-3.010ESP32
Geophys mainboard
Benjamin-girard-1
190 × 110 mm272 parts4LNo license0Placed unrouted
nahhao74
52 × 90 mm66 parts2LMIT0ESP32
Mainboard v2
Benjamin-girard-1
190 × 110 mm244 parts4LNo license0FlashCardBanked2M
clydeshaffer
47.9 × 47.9 mm9 parts4LNo license146
How designs wire the 74HC595D,118
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the 74HC595D,118 connects to, and the resistors, capacitors and other passives placed on it.
- The SRCLR pin is tied to 3.3V on 8 of 13 designs (a signal on 4).
- The OE pin has a pull-up to 3.3V on 6 of 13 designs, most often 10 kΩ (then 4.7 kΩ).
- The VCC pin has a decoupling capacitor on 6 of 13 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| QBpin 1 | Connected to: A connector 23% |
|
| QCpin 2 | Connected to: Signal 100% |
|
| QDpin 3 | Connected to: Signal 100% |
|
| QEpin 4 | Connected to: Signal 100% |
|
| QFpin 5 | Connected to: Signal 100% |
|
| QGpin 6 | Connected to: A connector 23% |
|
| QHpin 7 | Connected to: A connector 23% |
|
| GNDpin 8 | Connected to: GND 92% | — |
| SRCLRpin 10 | Connected to: 3.3V 62% · a signal 31% | — |
| SRCLKpin 11 | Connected to: 74HC595D,118 38%, a connector 31% |
|
| RCLKpin 12 | Connected to: 74HC595D,118 38%, a connector 31% |
|
| OEpin 13 | Connected to: 74HC595D,118 31% · GND 23% |
|
| SERpin 14 | Connected to: A connector 23% |
|
| QApin 15 | Connected to: A connector 23% |
|
| VCCpin 16 | Connected to: 3.3V 92% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FlashCardBanked2M by clydeshaffer, Le oeuf by eggsworks, Driver by nathdobson and Rioctrl shiftio by festlv.
The 74HC595D,118 in open source designs
The gallery holds 16 open source boards using the 74HC595D,118 from 13 GitHub repositories; a typical one measures about 121 × 95 mm and carries around 258 components.
56% use four copper layers or more, and 50% carry an open source license.
The most starred is FlashCardBanked2M by clydeshaffer.
Parts used alongside the 74HC595D,118
Microcontrollers on boards using the 74HC595D,118
What boards using the 74HC595D,118 are built for
74HC595D,118: common questions
Where can I find a 74HC595D,118 reference design?
Each of the 16 boards on this page is a real design using the 74HC595D,118. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74HC595D,118 SRCLR pin connected?
The SRCLR pin is tied to 3.3V on 8 of 13 designs (a signal on 4). Counted from the KiCad layouts of 13 open source designs using the 74HC595D,118.
What pull-up resistor is used on the 74HC595D,118 OE pin?
The OE pin has a pull-up to 3.3V on 6 of 13 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 13 open source designs using the 74HC595D,118.
What decoupling capacitors do designs use on the 74HC595D,118 VCC pin?
The VCC pin has a decoupling capacitor on 6 of 13 designs, most often 100 nF. Counted from the KiCad layouts of 13 open source designs using the 74HC595D,118.
Which microcontrollers do boards using the 74HC595D,118 use?
Most are built on ESP32 (4), Raspberry Pi (2), RP2040/RP2350 (1) and TI MSP430/CC (1).
How big is a typical board using the 74HC595D,118?
The median is 121 × 95 mm, and 44% are two-layer designs.
What is the most popular open source board using the 74HC595D,118?
By GitHub stars, FlashCardBanked2M by clydeshaffer, with 146 stars.
Can I simulate one of these boards using the 74HC595D,118 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.