7 open source boards using the 74HCT125D

Real designs built with the 74HCT125D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the 74HCT125D

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74HCT125D connects to, and the resistors, capacitors and other passives placed on it.

  • The 1OE* pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ.
  • The 2OE* pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ (then 100 kΩ).
  • The 3OE* pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ (then 100 kΩ).
  • The 2A* pin is tied to GND on 4 of 6 designs (a signal on 2).
1OE*pin 1Connected to: Scarab_mini_spartan_6_lx25 33% · GND 33%
  • Pull-up to 3.3V on 67% · 10 kΩ (4)
2OE*pin 4Connected to: Scarab_mini_spartan_6_lx25 33% · GND 33%
  • Pull-up to 3.3V on 67% · 10 kΩ (3), 100 kΩ (1)
2A*pin 5Connected to: GND 67% · a signal 33%
GNDpin 7Connected to: GND 100%
3OE*pin 10Connected to: Scarab_mini_spartan_6_lx25 33% · GND 33%
  • Pull-up to 3.3V on 67% · 10 kΩ (3), 100 kΩ (1)
4OE*pin 13Connected to: GND 50% · a signal 50%
  • Pull-up to 3.3V on 50% · 10 kΩ (2), 100 kΩ (1)
VCCpin 14Connected to: 5V 100%

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Acorn electron expansion by google, LegRobotBoardTeensy by 01binary, ElectronULA by adbsolutions and Homebrew 65c02 Computer by snorklerjoe.

The 74HCT125D in open source designs

The gallery holds 7 open source boards using the 74HCT125D from 6 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 115 components.

71% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.

The most starred is Acorn electron expansion by google.

Microcontrollers on boards using the 74HCT125D

What boards using the 74HCT125D are built for

74HCT125D: common questions

Where can I find a 74HCT125D reference design?

Each of the 7 boards on this page is a real design using the 74HCT125D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the 74HCT125D 1OE* pin?

The 1OE* pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the 74HCT125D.

What pull-up resistor is used on the 74HCT125D 2OE* pin?

The 2OE* pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 6 open source designs using the 74HCT125D.

What pull-up resistor is used on the 74HCT125D 3OE* pin?

The 3OE* pin has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 6 open source designs using the 74HCT125D.

What parts are used alongside the 74HCT125D?

The 74LVC245, 74LVC245 A0-7, 74LVC245 A8-15, C75561 and scarab_mini_spartan_6_lx25 appear in the most repositories here.

Which microcontrollers do boards using the 74HCT125D use?

Most are built on NXP (2), FPGA (1) and PIC (1).

How big is a typical board using the 74HCT125D?

The median is 100 × 100 mm, and 71% are two-layer designs.

What is the most popular open source board using the 74HCT125D?

By GitHub stars, Acorn electron expansion by google, with 59 stars.

Can I simulate one of these boards using the 74HCT125D before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part