6 open source boards using the 74LVC2G74

Real designs built with the 74LVC2G74, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the 74LVC2G74

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74LVC2G74 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 100 µF).
  • The PRE pin is tied to VCC on 4 of 6 designs (a signal on 2).
  • The CLR pin has a capacitor to GND on 3 of 6 designs, most often 100 nF.
Cpin 1Connected to: Signal 100%
  • Resistor to GND on 33% · 4.7 kΩ (1), 100 kΩ (1)
Qpin 3, 5Connected to: Signal 67% · not connected 33%
  • Series resistor on 33% · 0 Ω (1), 330 Ω (1)
GNDpin 4Connected to: GND 100%
CLRpin 6Connected to: 74LVC1G02 33% · VCC 33%
  • Capacitor to GND on 50% · 100 nF (3)
PREpin 7Connected to: VCC 67% · a signal 33%
VCCpin 8Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 83% · 100 nF (5), 100 µF (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PhaseLatch by AndersBNielsen, OpenPnPVis by angusgbishop, Shared usb memory by hnz1102 and SimplifiedEconetInstallKit by kgl2001.

The 74LVC2G74 in open source designs

The gallery holds 6 open source boards using the 74LVC2G74 from 6 GitHub repositories; a typical one measures about 61.9 × 44.9 mm and carries around 79 components.

50% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is PhaseLatch by AndersBNielsen.

Parts used alongside the 74LVC2G74

Microcontrollers on boards using the 74LVC2G74

What boards using the 74LVC2G74 are built for

74LVC2G74: common questions

Where can I find a 74LVC2G74 reference design?

Each of the 6 boards on this page is a real design using the 74LVC2G74. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LVC2G74 VCC pin?

The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 100 µF). Counted from the KiCad layouts of 6 open source designs using the 74LVC2G74.

How is the 74LVC2G74 PRE pin connected?

The PRE pin is tied to VCC on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the 74LVC2G74.

How is the 74LVC2G74 CLR pin connected?

The CLR pin has a capacitor to GND on 3 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the 74LVC2G74.

Which microcontrollers do boards using the 74LVC2G74 use?

Most are built on AVR/Arduino (2) and STM32 (1).

How big is a typical board using the 74LVC2G74?

The median is 61.9 × 44.9 mm, and 50% are two-layer designs.

What is the most popular open source board using the 74LVC2G74?

By GitHub stars, PhaseLatch by AndersBNielsen, with 45 stars.

Can I simulate one of these boards using the 74LVC2G74 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part