2 open source boards using the 93C46B-SOT-23-6

Real designs built with the 93C46B-SOT-23-6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The 93C46B-SOT-23-6 in open source designs

The gallery holds 2 open source boards using the 93C46B-SOT-23-6 from 2 GitHub repositories; a typical one measures about 73 × 37 mm and carries around 133 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is ICEBreaker by frohro.

Parts used alongside the 93C46B-SOT-23-6

Microcontrollers on boards using the 93C46B-SOT-23-6

What boards using the 93C46B-SOT-23-6 are built for

93C46B-SOT-23-6: common questions

Where can I find a 93C46B-SOT-23-6 reference design?

Each of the 2 boards on this page is a real design using the 93C46B-SOT-23-6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 93C46B-SOT-23-6?

The 12MHz, 1V2, 3.3V and FT2232H appear in the most repositories here.

Which microcontrollers do boards using the 93C46B-SOT-23-6 use?

Most are built on FPGA (2).

How big is a typical board using the 93C46B-SOT-23-6?

The median is 73 × 37 mm, and 0% are two-layer designs.

What is the most popular open source board using the 93C46B-SOT-23-6?

By GitHub stars, ICEBreaker by frohro, with 0 stars.

Can I simulate one of these boards using the 93C46B-SOT-23-6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part