7 open source boards using the AD8628
Real designs built with the AD8628, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
FOME Open Source Wideband O2 Module
mck1117
29 × 20.9 mm59 parts4LMIT76STM32
Wideband controller
jlwinland
29 × 20.9 mm59 parts4LUnlicense3STM32
Fome mc
halbritt
162 × 115 mm462 parts4LNo license0STM32
Miata ecu daughter
v3ai
125 × 60 mm226 parts4LMIT0STM32
Wideband controller
JRDMcLAREN
29 × 20.9 mm59 parts4LMIT0STM32
Wideband controller
FDSoftware
29 × 20.9 mm59 parts4LMIT0STM32
WBO
andreika-git
24.6 × 14 mm63 parts4LNo license36
How designs wire the AD8628
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the AD8628 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a series resistor on 7 of 7 designs, most often 100 kΩ (then 3.3 kΩ).
- The + pin has a series resistor on 7 of 7 designs, most often 100 kΩ (then 10 kΩ).
- The - pin has a series resistor on 7 of 7 designs, most often 100 kΩ (then 10 kΩ).
- The V+ pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 4.7 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 100% |
|
| V-pin 2 | Connected to: GND 100% | — |
| +pin 3 | Connected to: Signal 100% |
|
| -pin 4 | Connected to: Signal 100% |
|
| V+pin 5 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FOME Open Source Wideband O2 Module by mck1117, WBO by andreika-git, Wideband controller by jlwinland and Wideband controller by FDSoftware.
The AD8628 in open source designs
The gallery holds 7 open source boards using the AD8628 from 7 GitHub repositories; a typical one measures about 29 × 20.9 mm and carries around 59 components.
100% use four copper layers or more, and 71% carry an open source license.
The most starred is FOME Open Source Wideband O2 Module by mck1117.
Parts used alongside the AD8628
Microcontrollers on boards using the AD8628
What boards using the AD8628 are built for
AD8628: common questions
Where can I find a AD8628 reference design?
Each of the 7 boards on this page is a real design using the AD8628. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the AD8628 pin 1?
Pin 1 has a series resistor on 7 of 7 designs, most often 100 kΩ (then 3.3 kΩ). Counted from the KiCad layouts of 7 open source designs using the AD8628.
What resistor goes on the AD8628 + pin?
The + pin has a series resistor on 7 of 7 designs, most often 100 kΩ (then 10 kΩ). Counted from the KiCad layouts of 7 open source designs using the AD8628.
What resistor goes on the AD8628 - pin?
The - pin has a series resistor on 7 of 7 designs, most often 100 kΩ (then 10 kΩ). Counted from the KiCad layouts of 7 open source designs using the AD8628.
What parts are used alongside the AD8628?
The MCP6004, REF3033, STM32F042K6TX, XC6206P332MR and LMR14020 appear in the most repositories here.
Which microcontrollers do boards using the AD8628 use?
Most are built on STM32 (7).
How big is a typical board using the AD8628?
The median is 29 × 20.9 mm, and 0% are two-layer designs.
What is the most popular open source board using the AD8628?
By GitHub stars, FOME Open Source Wideband O2 Module by mck1117, with 76 stars.
Can I simulate one of these boards using the AD8628 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.