4 open source boards using the ADM3483
Real designs built with the ADM3483, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Hardware IO 16 8 1
PPUC
100 × 100 mm217 parts2LTAPR-OHL-1.05RP2040/RP2350
Hardware IO 16x8 matrix
PPUC
97.6 × 67.3 mm202 parts2LTAPR-OHL-1.00RP2040/RP2350
Hardware Opto 16
PPUC
99.7 × 67.3 mm200 parts2LTAPR-OHL-1.00RP2040/RP2350
Hardware Out 8x10
PPUC
97.6 × 67.3 mm162 parts2LTAPR-OHL-1.00
The ADM3483 in open source designs
The gallery holds 4 open source boards using the ADM3483 from 4 GitHub repositories; a typical one measures about 98.7 × 67.3 mm and carries around 201 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Hardware IO 16 8 1 by PPUC.
Parts used alongside the ADM3483
Microcontrollers on boards using the ADM3483
ADM3483: common questions
Where can I find a ADM3483 reference design?
Each of the 4 boards on this page is a real design using the ADM3483. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the ADM3483?
The AP2112K-3.3, LMV321, RP2040, SN74AHCT1G125 and W25Q128JVSIQ appear in the most repositories here.
Which microcontrollers do boards using the ADM3483 use?
Most are built on RP2040/RP2350 (4).
How big is a typical board using the ADM3483?
The median is 98.7 × 67.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the ADM3483?
By GitHub stars, Hardware IO 16 8 1 by PPUC, with 5 stars.
Can I simulate one of these boards using the ADM3483 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.