5 open source boards using the ADS7828E/250

Real designs built with the ADS7828E/250, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The ADS7828E/250 in open source designs

The gallery holds 5 open source boards using the ADS7828E/250 from 4 GitHub repositories; a typical one measures about 150 × 100 mm and carries around 174 components.

60% use four copper layers or more, and 40% carry an open source license.

The most starred is Fox-1-MPPT by FaradayRF.

Parts used alongside the ADS7828E/250

Microcontrollers on boards using the ADS7828E/250

ADS7828E/250: common questions

Where can I find a ADS7828E/250 reference design?

Each of the 5 boards on this page is a real design using the ADS7828E/250. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ADS7828E/250 use?

Most are built on ESP32 (2).

How big is a typical board using the ADS7828E/250?

The median is 150 × 100 mm, and 40% are two-layer designs.

What is the most popular open source board using the ADS7828E/250?

By GitHub stars, Fox-1-MPPT by FaradayRF, with 62 stars.

Can I simulate one of these boards using the ADS7828E/250 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part