6 open source boards using the AK4458VN
Real designs built with the AK4458VN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
FreeDSP-aurora
freeDSP
110 × 110 mm502 parts2LCC-BY-SA-4.0222FreeDSPx-AnalogIO-x8
freeDSP
120 × 120 mm413 parts2LNo license10STM32
Mes main board
jmh8231-Dev
160 × 145 mm727 parts6LNo license2DAC-AK4458
ohdsp
100 × 100 mm220 parts4LNo license2ESP32
FreeDSP-aurora
mischuja
110 × 110 mm502 parts2LGPL-3.01DAC4458
fabguitar69690
78.2 × 55.4 mm180 parts2LNo license0
How designs wire the AK4458VN
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the AK4458VN connects to, and the resistors, capacitors and other passives placed on it.
- The OUTL1+ pin has a series resistor on 6 of 6 designs, most often 3.9 kΩ (then 240 Ω).
- The OUTL1- pin has a series resistor on 6 of 6 designs, most often 100 Ω (then 3.9 kΩ).
- The OUTR1- pin has a series resistor on 6 of 6 designs, most often 100 Ω (then 3.9 kΩ).
- The OUTR1+ pin has a series resistor on 6 of 6 designs, most often 3.9 kΩ (then 240 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| MCLKpin 1 | Connected to: AK5558VN 50%, NC7SZ157P6X 33% |
|
| BICK/DCLKpin 2 | Connected to: Signal 100% |
|
| LRCKpin 3 | Connected to: Signal 100% |
|
| SDTI1pin 4 | Connected to: Signal 100% |
|
| SDTI2pin 5 | Connected to: GND 83% · a signal 17% | — |
| SDTI3pin 6 | Connected to: GND 83% · a signal 17% | — |
| SDTI4pin 7 | Connected to: GND 83% · a signal 17% | — |
| DSDR3pin 8 | Connected to: GND 83% · a signal 17% | — |
| DSDL4pin 9 | Connected to: GND 83% · a signal 17% | — |
| DSDR4pin 10 | Connected to: GND 83% · a signal 17% | — |
| DZF/SMUTEpin 11 | Connected to: GND 67% · a signal 33% |
|
| CAD1/DCHAINpin 12 | Connected to: GND 83% · a signal 17% | — |
| SDApin 13 | Connected to: The microcontroller 50%, ADAU1452WBCPZ 33%, AK5558VN 33% |
|
| SCLpin 14 | Connected to: The microcontroller 50%, ADAU1452WBCPZ 33%, AK5558VN 33% |
|
| CAD0-I2C/CSN/DIFpin 15 | Connected to: GND 67% · a signal 33% | — |
| PS/CAD0-SPIpin 16 | Connected to: GND 67% · a signal 33% |
|
| OUTL1+pin 18 | Connected to: Signal 100% |
|
| OUTL1-pin 19 | Connected to: Signal 100% |
|
| VREFL1pin 20 | Connected to: GND 100% | — |
| VREFH1pin 21 | Connected to: Signal 67% · 5V 33% |
|
| OUTR1-pin 22 | Connected to: Signal 100% |
|
| OUTR1+pin 23 | Connected to: Signal 100% |
|
| OUTL2+pin 24 | Connected to: Signal 83% · not connected 17% |
|
| OUTL2-pin 25 | Connected to: Signal 83% · not connected 17% |
|
| VREFL2pin 26 | Connected to: GND 100% | — |
| VREFH2pin 27 | Connected to: Signal 67% · 5V 33% |
|
| OUTR2-pin 28 | Connected to: Signal 83% · not connected 17% |
|
| OUTR2+pin 29 | Connected to: Signal 83% · not connected 17% |
|
| AVSSpin 30 | Connected to: GND 100% | — |
| AVDDpin 31 | Connected to: 5V 100% |
|
| OUTL3+pin 32 | Connected to: Signal 83% · not connected 17% |
|
| OUTL3-pin 33 | Connected to: Signal 83% · not connected 17% |
|
| VREFH3pin 34 | Connected to: Signal 67% · 5V 33% |
|
| VREFL3pin 35 | Connected to: GND 100% | — |
| OUTR3-pin 36 | Connected to: Signal 83% · not connected 17% |
|
| OUTR3+pin 37 | Connected to: Signal 83% · not connected 17% |
|
| OUTL4+pin 38 | Connected to: Signal 83% · not connected 17% |
|
| OUTL4-pin 39 | Connected to: Signal 83% · not connected 17% |
|
| VREFH4pin 40 | Connected to: Signal 67% · 5V 33% |
|
| VREFL4pin 41 | Connected to: GND 100% | — |
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FreeDSP-aurora by freeDSP, FreeDSPx-AnalogIO-x8 by freeDSP, Mes main board by jmh8231-Dev and DAC-AK4458 by ohdsp.
The AK4458VN in open source designs
The gallery holds 6 open source boards using the AK4458VN from 6 GitHub repositories; a typical one measures about 110 × 110 mm and carries around 458 components.
67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is FreeDSP-aurora by freeDSP.
Parts used alongside the AK4458VN
What boards using the AK4458VN are built for
AK4458VN: common questions
Where can I find a AK4458VN reference design?
Each of the 6 boards on this page is a real design using the AK4458VN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the AK4458VN OUTL1+ pin?
The OUTL1+ pin has a series resistor on 6 of 6 designs, most often 3.9 kΩ (then 240 Ω). Counted from the KiCad layouts of 6 open source designs using the AK4458VN.
What resistor goes on the AK4458VN OUTL1- pin?
The OUTL1- pin has a series resistor on 6 of 6 designs, most often 100 Ω (then 3.9 kΩ). Counted from the KiCad layouts of 6 open source designs using the AK4458VN.
What resistor goes on the AK4458VN OUTR1- pin?
The OUTR1- pin has a series resistor on 6 of 6 designs, most often 100 Ω (then 3.9 kΩ). Counted from the KiCad layouts of 6 open source designs using the AK4458VN.
What parts are used alongside the AK4458VN?
The AK5558VN, OPA1652AIDR, 25AA1024T-I/SM, ADAU1452WBCPZ and ADM811TARTZ-REEL appear in the most repositories here.
Which microcontrollers do boards using the AK4458VN use?
Most are built on ESP32 (2) and STM32 (1).
How big is a typical board using the AK4458VN?
The median is 110 × 110 mm, and 67% are two-layer designs.
What is the most popular open source board using the AK4458VN?
By GitHub stars, FreeDSP-aurora by freeDSP, with 222 stars.
Can I simulate one of these boards using the AK4458VN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.