5 open source boards using the ADM811TARTZ-REEL
Real designs built with the ADM811TARTZ-REEL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
FreeDSP-aurora
freeDSP
110 × 110 mm502 parts2LCC-BY-SA-4.0222FreeDSP-INFINITAS
freeDSP
240 × 70 mm204 parts2LNo license35ESP32
FreeDSP-aurora
mischuja
110 × 110 mm502 parts2LGPL-3.01STM32
SmallDSPMicro
Gemuesesaft
100 × 100 mm284 parts4LGPL-3.01ESP32
Adau1492
fabguitar69690
113 × 77 mm171 parts2LNo license0
How designs wire the ADM811TARTZ-REEL
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ADM811TARTZ-REEL connects to, and the resistors, capacitors and other passives placed on it.
- The RST pin has a resistor to GND on 5 of 5 designs, most often 100 kΩ.
- The RST pin has a pull-up to VDD on 5 of 5 designs, most often 10 kΩ.
- The MNRST pin has a series resistor on 5 of 5 designs, most often 1 kΩ.
- The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| RSTpin 2 | Connected to: ADAU1452WBCPZ 80%, AK4458VN 40%, AK5558VN 40% |
|
| MNRSTpin 3 | Connected to: Signal 100% |
|
| VCCpin 4 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FreeDSP-aurora by freeDSP, FreeDSP-INFINITAS by freeDSP, SmallDSPMicro by Gemuesesaft and FreeDSP-aurora by mischuja.
The ADM811TARTZ-REEL in open source designs
The gallery holds 5 open source boards using the ADM811TARTZ-REEL from 5 GitHub repositories; a typical one measures about 110 × 100 mm and carries around 284 components.
80% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is FreeDSP-aurora by freeDSP.
Parts used alongside the ADM811TARTZ-REEL
What boards using the ADM811TARTZ-REEL are built for
ADM811TARTZ-REEL: common questions
Where can I find a ADM811TARTZ-REEL reference design?
Each of the 5 boards on this page is a real design using the ADM811TARTZ-REEL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the ADM811TARTZ-REEL RST pin?
The RST pin has a resistor to GND on 5 of 5 designs, most often 100 kΩ. Counted from the KiCad layouts of 5 open source designs using the ADM811TARTZ-REEL.
What resistor goes on the ADM811TARTZ-REEL MNRST pin?
The MNRST pin has a series resistor on 5 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 5 open source designs using the ADM811TARTZ-REEL.
What decoupling capacitors do designs use on the ADM811TARTZ-REEL VCC pin?
The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the ADM811TARTZ-REEL.
What parts are used alongside the ADM811TARTZ-REEL?
The 25AA1024T-I/SM, ADAU1452WBCPZ, LM1117MP-5.0/NOPB, NC7WZ07P6X and CS2100CP-CZZ appear in the most repositories here.
Which microcontrollers do boards using the ADM811TARTZ-REEL use?
Most are built on ESP32 (3) and STM32 (1).
How big is a typical board using the ADM811TARTZ-REEL?
The median is 110 × 100 mm, and 80% are two-layer designs.
What is the most popular open source board using the ADM811TARTZ-REEL?
By GitHub stars, FreeDSP-aurora by freeDSP, with 222 stars.
Can I simulate one of these boards using the ADM811TARTZ-REEL before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.