6 open source boards using the OPA1652AIDR

Real designs built with the OPA1652AIDR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the OPA1652AIDR

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the OPA1652AIDR connects to, and the resistors, capacitors and other passives placed on it.

  • The - pins have a series resistor on 5 of 6 designs, most often 100 Ω (then 10 kΩ).
  • The OUTB_7 pin has a series resistor on 5 of 6 designs, most often 100 Ω (then 20 kΩ).
  • The V+ pin has a decoupling capacitor on 5 of 6 designs, most often 10 µF (then 100 nF).
  • The OUTA_1 pin has a series capacitor on 4 of 6 designs, most often 330 pF.
OUTA_1pin 1Connected to: Signal 83% · not connected 17%
  • Series capacitor on 67% · 330 pF (1)
  • Series resistor on 67% · 10 kΩ (1), 1 kΩ (1)
-pin 2, 6Connected to: Signal 92%
  • Series resistor on 83% · 100 Ω (1), 10 kΩ (1), 20 kΩ (1)
  • Series capacitor on 67% · 330 pF (1), 470 pF (1)
+pin 3, 5Connected to: OPA1652AIDR 25% · not connected 17%
  • Series resistor on 67% · 1 kΩ (2)
  • Series capacitor on 67%
  • Capacitor to GND on 67% · 2.2 nF (2)
  • Resistor to GND on 33% · 2 kΩ (2), 2 MΩ (1)
V-pin 4Connected to: GND 67% · not connected 17% · 4.5V 17%
OUTB_7pin 7Connected to: Signal 100%
  • Series resistor on 83% · 100 Ω (2), 20 kΩ (1)
  • Series capacitor on 67% · 470 pF (1)
V+pin 8Connected to: 5V 83% · not connected 17%
  • Decoupling capacitor on 83% · 10 µF (1), 100 nF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FreeDSP-aurora by freeDSP, GuitarPedalSTM32 by GuitarML, FreeDSP-aurora by mischuja and VAMP by syntonos.

The OPA1652AIDR in open source designs

The gallery holds 6 open source boards using the OPA1652AIDR from 6 GitHub repositories; a typical one measures about 94.1 × 94.1 mm and carries around 141 components.

50% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.

The most starred is FreeDSP-aurora by freeDSP.

Microcontrollers on boards using the OPA1652AIDR

What boards using the OPA1652AIDR are built for

OPA1652AIDR: common questions

Where can I find a OPA1652AIDR reference design?

Each of the 6 boards on this page is a real design using the OPA1652AIDR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the OPA1652AIDR - pin?

The - pins have a series resistor on 5 of 6 designs, most often 100 Ω (then 10 kΩ). Counted from the KiCad layouts of 6 open source designs using the OPA1652AIDR.

What resistor goes on the OPA1652AIDR OUTB_7 pin?

The OUTB_7 pin has a series resistor on 5 of 6 designs, most often 100 Ω (then 20 kΩ). Counted from the KiCad layouts of 6 open source designs using the OPA1652AIDR.

What decoupling capacitors do designs use on the OPA1652AIDR V+ pin?

The V+ pin has a decoupling capacitor on 5 of 6 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the OPA1652AIDR.

What parts are used alongside the OPA1652AIDR?

The AK4458VN, 25AA1024T-I/SM, ADAU1452WBCPZ, ADM811TARTZ-REEL and AK5558VN appear in the most repositories here.

Which microcontrollers do boards using the OPA1652AIDR use?

Most are built on ESP32 (2), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the OPA1652AIDR?

The median is 94.1 × 94.1 mm, and 50% are two-layer designs.

What is the most popular open source board using the OPA1652AIDR?

By GitHub stars, FreeDSP-aurora by freeDSP, with 222 stars.

Can I simulate one of these boards using the OPA1652AIDR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part