5 open source boards using the AMS1117-5V
Real designs built with the AMS1117-5V, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Tj01-ms51-heater controller
jbteja
100 × 100 mm71 parts2LMIT1RP2040/RP2350
Smart home automations
Sindhujashree-17
231 × 175.3 mm50 parts2LNo license0AVR/Arduino
Easyduino Atmega
Hanqaqa
68.8 × 53.6 mm35 parts4LCERN-OHL-P-2.0754Transmitter
AdmondDeng
98 × 68 mm14 parts2LNo license0ESP32
ESP32-Uno-Board v2
halherta
68.8 × 53.3 mm23 parts2LNo license1
How designs wire the AMS1117-5V
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the AMS1117-5V connects to, and the resistors, capacitors and other passives placed on it.
- The ADJ_1 pin is tied to GND on 3 of 5 designs (5V on 2).
- The VI pin has a decoupling capacitor on 2 of 5 designs, most often 10 µF (then 1 µF).
- The VIN pin is left unconnected on 2 of 3 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ADJ_1pin 1 | Connected to: GND 60% · 5V 40% | — |
| VOpin 2 | Connected to: 5V 60% · GND 20% · a signal 20% | — |
| VIpin 3 | Connected to: GND 40% · VCC 40% · a signal 20% |
|
| VINpin 4 | Connected to: Not connected 67% · 8V 33% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Easyduino Atmega by Hanqaqa, ESP32-Uno-Board v2 by halherta, Tj01-ms51-heater controller by jbteja and Transmitter by AdmondDeng.
The AMS1117-5V in open source designs
The gallery holds 5 open source boards using the AMS1117-5V from 5 GitHub repositories; a typical one measures about 98 × 68 mm and carries around 35 components.
80% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is Easyduino Atmega by Hanqaqa.
Parts used alongside the AMS1117-5V
Microcontrollers on boards using the AMS1117-5V
What boards using the AMS1117-5V are built for
AMS1117-5V: common questions
Where can I find a AMS1117-5V reference design?
Each of the 5 boards on this page is a real design using the AMS1117-5V. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AMS1117-5V ADJ_1 pin connected?
The ADJ_1 pin is tied to GND on 3 of 5 designs (5V on 2). Counted from the KiCad layouts of 5 open source designs using the AMS1117-5V.
What decoupling capacitors do designs use on the AMS1117-5V VI pin?
The VI pin has a decoupling capacitor on 2 of 5 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the AMS1117-5V.
How is the AMS1117-5V VIN pin connected?
The VIN pin is left unconnected on 2 of 3 designs. Counted from the KiCad layouts of 5 open source designs using the AMS1117-5V.
Which microcontrollers do boards using the AMS1117-5V use?
Most are built on AVR/Arduino (1), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the AMS1117-5V?
The median is 98 × 68 mm, and 80% are two-layer designs.
What is the most popular open source board using the AMS1117-5V?
By GitHub stars, Easyduino Atmega by Hanqaqa, with 754 stars.
Can I simulate one of these boards using the AMS1117-5V before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.