6 open source boards using the AP2127K-ADJ

Real designs built with the AP2127K-ADJ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the AP2127K-ADJ

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the AP2127K-ADJ connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 22 µF).
  • The VOUT pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 100 nF).
  • The EN pin is tied to 5V on 4 of 5 designs.
  • The ADJ pin has a resistor to GND on 3 of 5 designs, most often 18 kΩ (then 5.1 kΩ).
VINpin 1Connected to: 5V 80% · a signal 20%
  • Decoupling capacitor on 100% · 1 µF (4), 22 µF (1)
GNDpin 2Connected to: GND 100%
ENpin 3Connected to: 5V 80% · a signal 20%
ADJpin 4Connected to: Signal 60% · 3.3V 40%
  • Resistor to GND on 60% · 18 kΩ (2), 5.1 kΩ (1)
  • Pull-up to 3.3V on 60% · 16 kΩ (1), 22.5 kΩ (1), 56 kΩ (1)
  • Capacitor to the supply on 40% · 1 nF (1), 390 pF (1)
VOUTpin 5Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 80% · 1 µF (4), 100 nF (1)
  • Capacitor on 40% · 1 nF (1), 390 pF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Duet3 MB by Duet3D, Duet3-Expansion-3HC by Duet3D, 74AUC-experiments by jaycordaro and HydCircCon by Bergi84.

The AP2127K-ADJ in open source designs

The gallery holds 6 open source boards using the AP2127K-ADJ from 5 GitHub repositories; a typical one measures about 75 × 81.5 mm and carries around 250 components.

83% use four copper layers or more, and 0% carry an open source license.

The most starred is Duet3 MB by Duet3D.

Microcontrollers on boards using the AP2127K-ADJ

AP2127K-ADJ: common questions

Where can I find a AP2127K-ADJ reference design?

Each of the 6 boards on this page is a real design using the AP2127K-ADJ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the AP2127K-ADJ VIN pin?

The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 22 µF). Counted from the KiCad layouts of 5 open source designs using the AP2127K-ADJ.

What decoupling capacitors do designs use on the AP2127K-ADJ VOUT pin?

The VOUT pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the AP2127K-ADJ.

How is the AP2127K-ADJ EN pin connected?

The EN pin is tied to 5V on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the AP2127K-ADJ.

What parts are used alongside the AP2127K-ADJ?

The 74HCT365, MCP2542, TMC5160, TS30041 and 74HCT2G34GW,125 appear in the most repositories here.

Which microcontrollers do boards using the AP2127K-ADJ use?

Most are built on Microchip SAM (3) and RP2040/RP2350 (2).

How big is a typical board using the AP2127K-ADJ?

The median is 75 × 81.5 mm, and 17% are two-layer designs.

What is the most popular open source board using the AP2127K-ADJ?

By GitHub stars, Duet3 MB by Duet3D, with 50 stars.

Can I simulate one of these boards using the AP2127K-ADJ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part