6 open source boards using the 74HCT365

Real designs built with the 74HCT365, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the 74HCT365

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74HCT365 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 16 has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
  • Pin 1 is tied to GND on 5 of 5 designs.
  • Pin 8 is tied to GND on 5 of 5 designs.
  • Pin 15 is tied to GND on 5 of 5 designs.
Pin 1Connected to: GND 100%
Pin 2Connected to: The microcontroller 80%
  • Resistor to GND on 80% · 10 kΩ (4)
Pin 3Connected to: Signal 100%
  • Series resistor on 80% · 180 Ω (4)
Pin 4Connected to: The microcontroller 80%
  • Resistor to GND on 80% · 10 kΩ (4)
Pin 5Connected to: Signal 100%
  • Series resistor on 80% · 180 Ω (4)
Pin 6Connected to: The microcontroller 80%
  • Resistor to GND on 80% · 10 kΩ (4)
Pin 7Connected to: Signal 100%
  • Series resistor on 80% · 180 Ω (3), 1 kΩ (1)
Pin 8Connected to: GND 100%
Pin 9Connected to: Signal 80% · not connected 20%
  • Series resistor on 60% · 1 kΩ (3)
Pin 10Connected to: The microcontroller 60% · GND 20%
  • Resistor to GND on 60% · 10 kΩ (3)
Pin 11Connected to: Signal 80% · not connected 20%
  • Series resistor on 60% · 1 kΩ (3)
Pin 12Connected to: The microcontroller 60% · GND 20%
  • Resistor to GND on 60% · 10 kΩ (3)
Pin 13Connected to: Signal 80% · not connected 20%
  • Series resistor on 60% · 1 kΩ (3), 100 Ω (1)
Pin 14Connected to: The microcontroller 60% · GND 20%
  • Resistor to GND on 60% · 10 kΩ (3)
Pin 15Connected to: GND 100%
Pin 16Connected to: 5V 100%
  • Decoupling capacitor on 100% · 100 nF (5)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Duet3 MB by Duet3D, CPUandGlueLogic by daveho, Duet 3 Mini 5+ Ethernet by Duet3D and Duet3-Expansion-3HC by Duet3D.

The 74HCT365 in open source designs

The gallery holds 6 open source boards using the 74HCT365 from 5 GitHub repositories; a typical one measures about 117 × 123 mm and carries around 408 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Duet3 MB by Duet3D.

Microcontrollers on boards using the 74HCT365

What boards using the 74HCT365 are built for

74HCT365: common questions

Where can I find a 74HCT365 reference design?

Each of the 6 boards on this page is a real design using the 74HCT365. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74HCT365 pin 16?

Pin 16 has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the 74HCT365.

How is the 74HCT365 pin 1 connected?

Pin 1 is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74HCT365.

How is the 74HCT365 pin 8 connected?

Pin 8 is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the 74HCT365.

What parts are used alongside the 74HCT365?

The MCP2542, TS30041, 74LVC2G34, AP2127K-ADJ and KSZ8081RNACA appear in the most repositories here.

Which microcontrollers do boards using the 74HCT365 use?

Most are built on Microchip SAM (4) and ESP32 (1).

How big is a typical board using the 74HCT365?

The median is 117 × 123 mm, and 0% are two-layer designs.

What is the most popular open source board using the 74HCT365?

By GitHub stars, Duet3 MB by Duet3D, with 50 stars.

Can I simulate one of these boards using the 74HCT365 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part