6 open source boards using the TS30041
Real designs built with the TS30041, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Duet 3 Mini 5+ Ethernet
Duet3D
100 × 123 mm408 parts4LCustom license12Microchip SAM
Duet3-Expansion-3HC
Duet3D
100 × 100 mm365 parts4LCustom license6STM32
UHoubolt PCB GNSS
SpaceTeam
84.9 × 76 mm85 parts4LCERN-OHL-W-2.00Microchip SAM
Duet3 MB
Duet3D
134 × 140 mm642 parts4LCustom license50ESP32
Duet 3 Mini 5+ Wifi
Duet3D
100 × 123 mm407 parts4LCustom license12Microchip SAM
Duet3 MB
ReadHeadRedemption
134 × 140 mm642 parts4LNo license0
How designs wire the TS30041
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TS30041 connects to, and the resistors, capacitors and other passives placed on it.
- The VSW pins have a inductor on 5 of 5 designs, most often 4.7 µH (then 10 µH).
- The VCC pins have a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 100 nF).
- The PG pin is left unconnected on 5 of 5 designs.
- The EN/SYNC pin is left unconnected on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSWpin 1, 12, 13, 16 | Connected to: 12V 80% · a signal 20% |
|
| VCCpin 2, 3, 11 | Connected to: 12V 100% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| FBpin 5 | Connected to: 12V 80% · a signal 20% | — |
| NCpin 6, 7 | Connected to: Not connected 100% | — |
| PGpin 8 | Connected to: Not connected 100% | — |
| EN/SYNCpin 9 | Connected to: Not connected 100% | — |
| BSTpin 10 | Connected to: 12V 80% · a signal 20% | — |
| PGNDpin 14, 15 | Connected to: GND 100% | — |
| PADpin 17 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Duet3 MB by Duet3D, Duet 3 Mini 5+ Ethernet by Duet3D, Duet3-Expansion-3HC by Duet3D and Duet3 MB by ReadHeadRedemption.
The TS30041 in open source designs
The gallery holds 6 open source boards using the TS30041 from 5 GitHub repositories; a typical one measures about 100 × 123 mm and carries around 408 components.
100% use four copper layers or more, and 17% carry an open source license.
The most starred is Duet3 MB by Duet3D.
Parts used alongside the TS30041
Microcontrollers on boards using the TS30041
What boards using the TS30041 are built for
TS30041: common questions
Where can I find a TS30041 reference design?
Each of the 6 boards on this page is a real design using the TS30041. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TS30041 VSW pin connected?
The VSW pins have a inductor on 5 of 5 designs, most often 4.7 µH (then 10 µH). Counted from the KiCad layouts of 5 open source designs using the TS30041.
What decoupling capacitors do designs use on the TS30041 VCC pin?
The VCC pins have a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the TS30041.
How is the TS30041 PG pin connected?
The PG pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TS30041.
What parts are used alongside the TS30041?
The 74HCT365, MCP2542, 74LVC2G34, AP2127K-ADJ and KSZ8081RNACA appear in the most repositories here.
Which microcontrollers do boards using the TS30041 use?
Most are built on Microchip SAM (4), ESP32 (1) and STM32 (1).
How big is a typical board using the TS30041?
The median is 100 × 123 mm, and 0% are two-layer designs.
What is the most popular open source board using the TS30041?
By GitHub stars, Duet3 MB by Duet3D, with 50 stars.
Can I simulate one of these boards using the TS30041 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.