5 open source boards using the TMC5160
Real designs built with the TMC5160, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
MLSinglePendulum
MagdiLaoun
70 × 54 mm6 parts2LNo license12Microchip SAM
Duet3-Expansion-3HC
Duet3D
100 × 100 mm365 parts4LCustom license6ESP32
MLDoublePendulum
MagdiLaoun
70 × 65 mm5 parts2LNo license5Microchip SAM
Duet3 MB
Duet3D
134 × 140 mm642 parts4LCustom license50Microchip SAM
Duet3 MB
ReadHeadRedemption
134 × 140 mm642 parts4LNo license0
How designs wire the TMC5160
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TMC5160 connects to, and the resistors, capacitors and other passives placed on it.
- The US pin is tied to 3.3V on 5 of 5 designs.
- The VCC pin has a series resistor on 3 of 5 designs, most often 150 Ω.
- The GND pins have a series capacitor on 3 of 5 designs, most often 220 nF (then 2.2 nF).
- The GND pins have a resistor to GND on 3 of 5 designs, most often 47 Ω.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCpin 1 | Connected to: Signal 60% · 5V 40% |
|
| GNDpin 2, 7, 16, 21 | Connected to: Signal 45% · GND 40% · 3.3V 15% |
|
| CSNpin 3 | Connected to: 12V 60% · a signal 40% | — |
| SCKpin 4 | Connected to: 12V 60% · a signal 40% | — |
| SDIpin 5 | Connected to: The microcontroller 40% |
|
| SDOpin 6 | Connected to: GND 60% · a signal 40% | — |
| CLK16pin 8 | Connected to: Signal 60% · not connected 40% |
|
| ENABLEpin 9 | Connected to: The microcontroller 40% |
|
| REFLpin 10 | Connected to: Signal 60% · not connected 40% |
|
| REFRpin 11 | Connected to: GND 60% · not connected 40% | — |
| ENCNpin 12 | Connected to: GND 60% · not connected 40% | — |
| A1pin 17 | Connected to: The microcontroller 60%, a connector 40% |
|
| B1pin 19 | Connected to: GND 60% · a signal 40% | — |
| B2pin 20 | Connected to: 3.3V 60% · a signal 40% | — |
| USpin 22 | Connected to: 3.3V 100% | — |
| Pin 23 | Connected to: GND 100% | — |
| Pin 24 | Connected to: GND 100% | — |
| Pin 25 | Connected to: Not connected 100% | — |
| Pin 27 | Connected to: Not connected 67% · a signal 33% | — |
| Pin 28 | Connected to: TMC5160 100%, the microcontroller 100% |
|
| Pin 29 | Connected to: Signal 100% |
|
| Pin 30 | Connected to: GND 100% | — |
| Pin 31 | Connected to: Signal 100% |
|
| Pin 32 | Connected to: Signal 100% |
|
| Pin 33 | Connected to: TMC5160 100%, a connector 100% |
|
| Pin 34 | Connected to: Signal 100% |
|
| Pin 35 | Connected to: Signal 100% |
|
| Pin 36 | Connected to: Signal 100% |
|
| Pin 37 | Connected to: A connector 100% |
|
| Pin 38 | Connected to: Signal 100% |
|
| Pin 39 | Connected to: Signal 100% |
|
| Pin 40 | Connected to: A connector 100% |
|
| Pin 41 | Connected to: Signal 100% |
|
| Pin 42 | Connected to: Signal 100% |
|
| Pin 43 | Connected to: Signal 100% |
|
| Pin 44 | Connected to: Signal 100% |
|
| Pin 45 | Connected to: A connector 100% |
|
| Pin 46 | Connected to: Signal 100% |
|
| Pin 47 | Connected to: Signal 100% |
|
| Pin 48 | Connected to: A connector 100% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Duet3 MB by Duet3D, MLSinglePendulum by MagdiLaoun, Duet3-Expansion-3HC by Duet3D and MLDoublePendulum by MagdiLaoun.
The TMC5160 in open source designs
The gallery holds 5 open source boards using the TMC5160 from 5 GitHub repositories; a typical one measures about 100 × 100 mm and carries around 365 components.
60% use four copper layers or more, and 0% carry an open source license.
The most starred is Duet3 MB by Duet3D.
Parts used alongside the TMC5160
Microcontrollers on boards using the TMC5160
TMC5160: common questions
Where can I find a TMC5160 reference design?
Each of the 5 boards on this page is a real design using the TMC5160. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TMC5160 US pin connected?
The US pin is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TMC5160.
What resistor goes on the TMC5160 VCC pin?
The VCC pin has a series resistor on 3 of 5 designs, most often 150 Ω. Counted from the KiCad layouts of 5 open source designs using the TMC5160.
How is the TMC5160 GND pin connected?
The GND pins have a series capacitor on 3 of 5 designs, most often 220 nF (then 2.2 nF). Counted from the KiCad layouts of 5 open source designs using the TMC5160.
What parts are used alongside the TMC5160?
The 74HCT365, AP2127K-ADJ, MCP2542, TS30041 and 74HCT2G34GW,125 appear in the most repositories here.
Which microcontrollers do boards using the TMC5160 use?
Most are built on Microchip SAM (3) and ESP32 (2).
How big is a typical board using the TMC5160?
The median is 100 × 100 mm, and 40% are two-layer designs.
What is the most popular open source board using the TMC5160?
By GitHub stars, Duet3 MB by Duet3D, with 50 stars.
Can I simulate one of these boards using the TMC5160 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.