5 open source boards using the AP22913W6-7
Real designs built with the AP22913W6-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
RPI CMx Carrier
lecejeff
181.6 × 100.6 mm652 parts8LNo license26Mbed ce ci shield v2
mbed-ce
104.5 × 91 mm164 parts4LCERN-OHL-P-2.07HackerDAQ Digital IO Card
multiplemonomials
90 × 90 mm251 parts2LNo license2- schematic only · 562 partsRaspberry Pi
OpenXTCM5-Head-Unit
mibs510
562 parts2LMIT0 HackerDAQ Main Unit
multiplemonomials
244.5 × 91 mm177 parts4LNo license2
The AP22913W6-7 in open source designs
The gallery holds 5 open source boards using the AP22913W6-7 from 4 GitHub repositories; a typical one measures about 143.1 × 91 mm and carries around 251 components.
60% use four copper layers or more, and 40% carry an open source license.
The most starred is RPI CMx Carrier by lecejeff.
Parts used alongside the AP22913W6-7
Microcontrollers on boards using the AP22913W6-7
What boards using the AP22913W6-7 are built for
AP22913W6-7: common questions
Where can I find a AP22913W6-7 reference design?
Each of the 5 boards on this page is a real design using the AP22913W6-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AP22913W6-7 use?
Most are built on PIC (1) and Raspberry Pi (1).
How big is a typical board using the AP22913W6-7?
The median is 143.1 × 91 mm, and 40% are two-layer designs.
What is the most popular open source board using the AP22913W6-7?
By GitHub stars, RPI CMx Carrier by lecejeff, with 26 stars.
Can I simulate one of these boards using the AP22913W6-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.