9 open source boards using the SN74AXC4T774

Real designs built with the SN74AXC4T774, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the SN74AXC4T774

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74AXC4T774 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCB pin has a decoupling capacitor on 4 of 4 designs, most often 100 nF (then 1 µF).
  • The VCCA pin has a decoupling capacitor on 3 of 4 designs, most often 100 nF (then 1 µF).
  • The DIR2 pin has a capacitor to GND on 2 of 5 designs, most often 1 µF (then 100 nF).
  • The DIR4 pin has a capacitor to GND on 2 of 5 designs, most often 100 nF (then 1 µF).
DIR2pin 2Connected to: Signal 60% · GND 20% · 3.3V 20%
  • Capacitor to GND on 40% · 1 µF (2), 100 nF (2)
DIR4pin 8Connected to: GND 40% · 1.2V 20% · a signal 40%
  • Capacitor to GND on 40% · 100 nF (5), 1 µF (1)
OE_9pin 9Connected to: Signal 100%
  • Resistor to GND on 50% · 20 kΩ (2)
GNDpin 10Connected to: GND 75% · a signal 25%
VCCBpin 15Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (4), 1 µF (1)
VCCApin 16Connected to: 1.2V 50% · GND 25% · a signal 25%
  • Decoupling capacitor on 75% · 100 nF (3), 1 µF (2)

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Naja duo by bitaxeorg, Mbed ce ci shield v2 by mbed-ce, BitaxeBIRDS by bitaxeorg and HackerDAQ Digital IO Card by multiplemonomials.

The SN74AXC4T774 in open source designs

The gallery holds 9 open source boards using the SN74AXC4T774 from 5 GitHub repositories; a typical one measures about 90 × 90 mm and carries around 164 components.

67% use four copper layers or more, and 67% carry an open source license.

The most starred is Naja duo by bitaxeorg.

Parts used alongside the SN74AXC4T774

Microcontrollers on boards using the SN74AXC4T774

SN74AXC4T774: common questions

Where can I find a SN74AXC4T774 reference design?

Each of the 9 boards on this page is a real design using the SN74AXC4T774. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SN74AXC4T774 VCCB pin?

The VCCB pin has a decoupling capacitor on 4 of 4 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the SN74AXC4T774.

What decoupling capacitors do designs use on the SN74AXC4T774 VCCA pin?

The VCCA pin has a decoupling capacitor on 3 of 4 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the SN74AXC4T774.

How is the SN74AXC4T774 DIR2 pin connected?

The DIR2 pin has a capacitor to GND on 2 of 5 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the SN74AXC4T774.

Which microcontrollers do boards using the SN74AXC4T774 use?

Most are built on FPGA (3), ESP32 (1) and RP2040/RP2350 (1).

How big is a typical board using the SN74AXC4T774?

The median is 90 × 90 mm, and 33% are two-layer designs.

What is the most popular open source board using the SN74AXC4T774?

By GitHub stars, Naja duo by bitaxeorg, with 7 stars.

Can I simulate one of these boards using the SN74AXC4T774 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part