8 open source boards using the AT28C256
Real designs built with the AT28C256, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
65816-computer
mike42
169.7 × 99.8 mm92 parts4LNo license34Plusd
alvaroalea
99.1 × 99.1 mm58 parts2LNo license24AVR/Arduino
6502 ACE Board
acwright
335 × 250 mm183 parts2LCERN-OHL-P-2.012ESP32
ZX21
fordp2002
142 × 100 mm125 parts2LBSD-3-Clause9Mcd
jack-mil
148 × 70.8 mm69 parts2LNo license2Dino v0 0 2
robertrico
298.9 × 222.8 mm179 parts4LNo license0RP2040/RP2350
6502
lolakkalol
648.5 × 231.5 mm57 parts2LNo license0MemExpansion
ja1umi
155 × 114 mm27 parts2LMIT10
How designs wire the AT28C256
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the AT28C256 connects to, and the resistors, capacitors and other passives placed on it.
- The WE pin is tied to 5V on 67% of them (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 14 | Connected to: GND 88% | — |
| WEpin 27 | Connected to: 5V 67% · a signal 33% | — |
| VCCpin 28 | Connected to: 5V 89% |
|
25 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 65816-computer by mike42, Plusd by alvaroalea, 6502 ACE Board by acwright and MemExpansion by ja1umi.
The AT28C256 in open source designs
The gallery holds 8 open source boards using the AT28C256 from 8 GitHub repositories; a typical one measures about 162.3 × 107 mm and carries around 81 components.
75% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.
The most starred is 65816-computer by mike42.
Parts used alongside the AT28C256
Microcontrollers on boards using the AT28C256
What boards using the AT28C256 are built for
AT28C256: common questions
Where can I find a AT28C256 reference design?
Each of the 8 boards on this page is a real design using the AT28C256. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AT28C256 WE pin connected?
The WE pin is tied to 5V on 67% of them (a signal on 3). Counted from the KiCad layouts of 8 open source designs using the AT28C256.
What parts are used alongside the AT28C256?
The AS6C62256, 74HCT00, 74LS00, AS6C4008 and GAL16V8 appear in the most repositories here.
Which microcontrollers do boards using the AT28C256 use?
Most are built on AVR/Arduino (1), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the AT28C256?
The median is 162.3 × 107 mm, and 75% are two-layer designs.
What is the most popular open source board using the AT28C256?
By GitHub stars, 65816-computer by mike42, with 34 stars.
Can I simulate one of these boards using the AT28C256 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.