8 open source boards using the ATMEGA16U2-A

Real designs built with the ATMEGA16U2-A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the ATMEGA16U2-A

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the ATMEGA16U2-A connects to, and the resistors, capacitors and other passives placed on it.

  • The XTAL1 pin has a capacitor to GND on 8 of 8 designs, most often 22 pF (then 8 pF).
  • The XTAL1 pin has a crystal on 8 of 8 designs, most often 16 MHz (then 8 MHz).
  • The PC0/XTAL2 pin has a crystal on 8 of 8 designs, most often 16 MHz (then 8 MHz).
  • The PC0/XTAL2 pin has a capacitor to GND on 8 of 8 designs, most often 22 pF (then 8 pF).
XTAL1pin 1Connected to: Signal 100%
  • Capacitor to GND on 100% · 22 pF (6), 8 pF (1)
  • Crystal on 100% · 16 MHz (3), 8 MHz (1)
  • Series resistor on 75% · 1 MΩ (5), 1 kΩ (1)
PC0/XTAL2pin 2Connected to: Signal 100%
  • Crystal on 100% · 16 MHz (3), 8 MHz (1)
  • Capacitor to GND on 100% · 22 pF (6), 8 pF (1)
  • Series resistor on 75% · 1 MΩ (5), 1 kΩ (1)
GNDpin 3Connected to: GND 88%
VCCpin 4Connected to: 5V 63% · a signal 25%
  • Decoupling capacitor on 50% · 100 nF (5), 47 µF (1), 1 µF (1)
PC2pin 5Connected to: Not connected 75% · a signal 25%
PD0pin 6Connected to: Not connected 75% · a signal 25%
PD1pin 7Connected to: Not connected 75% · a signal 25%
PD2pin 8Connected to: Signal 88%
  • Series resistor on 88% · 1 kΩ (6), 220 Ω (1)
PD3pin 9Connected to: Signal 88%
  • Series resistor on 88% · 1 kΩ (6), 220 Ω (1)
PD6pin 12Connected to: Not connected 88%
HWB/PD7pin 13Connected to: Signal 88%
  • Resistor to GND on 75% · 1 kΩ (5), 10 kΩ (1)
  • Series capacitor on 63% · 100 nF (5)
PB0pin 14Connected to: Not connected 88%
PC7pin 22Connected to: Not connected 75% · a signal 25%
PC6pin 23Connected to: Not connected 88%
PC1/RESETpin 24Connected to: A connector 88%
  • Pull-up to 5V on 63% · 10 kΩ (5)
PC5pin 25Connected to: Not connected 88%
PC4pin 26Connected to: Not connected 88%
UCAPpin 27Connected to: Signal 100%
  • Capacitor to GND on 75% · 1 µF (5), 100 nF (1)
UGNDpin 28Connected to: GND 75% · a signal 25%
D+pin 29Connected to: Signal 100%
  • Series resistor on 75% · 22 Ω (6)
D-pin 30Connected to: Signal 100%
  • Series resistor on 75% · 22 Ω (6)
AVCCpin 32Connected to: 5V 63% · a signal 25%
  • Decoupling capacitor on 50% · 100 nF (4), 47 µF (2), 1 µF (1)

10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Left Frame by FlightDeckDIY, Arduino-Uno-R3-PCB-Design by daviddzekwer, SLLed by iamjackchen and Arduino mega design by ISLOWIsmaeli.

The ATMEGA16U2-A in open source designs

The gallery holds 8 open source boards using the ATMEGA16U2-A from 8 GitHub repositories; a typical one measures about 84.3 × 59.9 mm and carries around 61 components.

63% are two-layer designs, the rest use four layers or more, and 38% carry an open source license.

The most starred is Left Frame by FlightDeckDIY.

Microcontrollers on boards using the ATMEGA16U2-A

What boards using the ATMEGA16U2-A are built for

ATMEGA16U2-A: common questions

Where can I find a ATMEGA16U2-A reference design?

Each of the 8 boards on this page is a real design using the ATMEGA16U2-A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the ATMEGA16U2-A XTAL1 pin connected?

The XTAL1 pin has a capacitor to GND on 8 of 8 designs, most often 22 pF (then 8 pF). Counted from the KiCad layouts of 8 open source designs using the ATMEGA16U2-A.

How is the ATMEGA16U2-A PC0/XTAL2 pin connected?

The PC0/XTAL2 pin has a crystal on 8 of 8 designs, most often 16 MHz (then 8 MHz). Counted from the KiCad layouts of 8 open source designs using the ATMEGA16U2-A.

What resistor goes on the ATMEGA16U2-A PD2 pin?

The PD2 pin has a series resistor on 7 of 8 designs, most often 1 kΩ (then 220 Ω). Counted from the KiCad layouts of 8 open source designs using the ATMEGA16U2-A.

What parts are used alongside the ATMEGA16U2-A?

The LMV358, LP2985-3.3, AMS1117-5.0, ATMEGA2560-16AU and ATmega328PB-A appear in the most repositories here.

Which microcontrollers do boards using the ATMEGA16U2-A use?

Most are built on AVR/Arduino (8).

How big is a typical board using the ATMEGA16U2-A?

The median is 84.3 × 59.9 mm, and 63% are two-layer designs.

What is the most popular open source board using the ATMEGA16U2-A?

By GitHub stars, Left Frame by FlightDeckDIY, with 14 stars.

Can I simulate one of these boards using the ATMEGA16U2-A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part