11 open source boards using the ATtiny412-SS

Real designs built with the ATtiny412-SS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the ATtiny412-SS

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the ATtiny412-SS connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 4 of 9 designs, most often 1 µF (then 100 nF).
  • The PA1 pin has a pull-up to VCC on 4 of 9 designs, most often 10 kΩ.
VCCpin 1Connected to: 5V 100%
  • Decoupling capacitor on 44% · 1 µF (2), 100 nF (2)
PA1pin 4Connected to: A connector 22% · not connected 22%
  • Pull-up to VCC on 44% · 10 kΩ (3)
PA3pin 7Connected to: Signal 89%
  • Resistor to GND on 33% · 4.7 kΩ (1), 10 kΩ (1)
GNDpin 8Connected to: GND 100%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TINYLED by adaand00, Useless box by ENACRobotique, QC-Hack reDesign by Fab-Lab-Island and Gain box psu pcb by carmisergio.

The ATtiny412-SS in open source designs

The gallery holds 11 open source boards using the ATtiny412-SS from 9 GitHub repositories; a typical one measures about 50 × 35.2 mm and carries around 15 components.

100% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.

The most starred is TINYLED by adaand00.

Microcontrollers on boards using the ATtiny412-SS

What boards using the ATtiny412-SS are built for

ATtiny412-SS: common questions

Where can I find a ATtiny412-SS reference design?

Each of the 11 boards on this page is a real design using the ATtiny412-SS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the ATtiny412-SS VCC pin?

The VCC pin has a decoupling capacitor on 4 of 9 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 9 open source designs using the ATtiny412-SS.

What pull-up resistor is used on the ATtiny412-SS PA1 pin?

The PA1 pin has a pull-up to VCC on 4 of 9 designs, most often 10 kΩ. Counted from the KiCad layouts of 9 open source designs using the ATtiny412-SS.

Which microcontrollers do boards using the ATtiny412-SS use?

Most are built on AVR/Arduino (11).

How big is a typical board using the ATtiny412-SS?

The median is 50 × 35.2 mm, and 100% are two-layer designs.

What is the most popular open source board using the ATtiny412-SS?

By GitHub stars, TINYLED by adaand00, with 5 stars.

Can I simulate one of these boards using the ATtiny412-SS before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part