4 open source boards using the BSS138DW-7-F

Real designs built with the BSS138DW-7-F, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The BSS138DW-7-F in open source designs

The gallery holds 4 open source boards using the BSS138DW-7-F from 4 GitHub repositories; a typical one measures about 40 × 31.7 mm and carries around 46 components.

75% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Protocentral easyecg hardware by Protocentral.

Microcontrollers on boards using the BSS138DW-7-F

What boards using the BSS138DW-7-F are built for

BSS138DW-7-F: common questions

Where can I find a BSS138DW-7-F reference design?

Each of the 4 boards on this page is a real design using the BSS138DW-7-F. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the BSS138DW-7-F?

The AP2112K-3.3, INA333xxDGK, OPA2333xxDGK, TLA2024IRUGR and USBLC6-4SC6 appear in the most repositories here.

Which microcontrollers do boards using the BSS138DW-7-F use?

Most are built on STM32 (1).

How big is a typical board using the BSS138DW-7-F?

The median is 40 × 31.7 mm, and 75% are two-layer designs.

What is the most popular open source board using the BSS138DW-7-F?

By GitHub stars, Protocentral easyecg hardware by Protocentral, with 1 stars.

Can I simulate one of these boards using the BSS138DW-7-F before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part