6 open source boards using the C15742
Real designs built with the C15742, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
VESC6 OPEN HARDWARE
craigg96
110 × 45 mm118 parts4LMIT24STM32
Driva x2
owennewo
100 × 67 mm147 parts4LNo license9STM32
VESC6 OPEN HARDWARE
duwogus7650-ctrl
110 × 45 mm118 parts4LNo license0STM32
VESC6 OPEN HARDWARE
duwogus7650-ctrl
110 × 45 mm118 parts4LNo license0STM32
Rocket-Build
Ben-Blair
70 × 45 mm74 parts4LNo license0STM32
Phils lab course
shinkuri
86.3 × 47.9 mm51 parts4LNo license0
How designs wire the C15742
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the C15742 connects to, and the resistors, capacitors and other passives placed on it.
- The VBAT pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 2.2 µF).
- The PH0-OSC_IN pin has a capacitor to GND on 6 of 6 designs, most often 15 pF (then 12 pF).
- The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 2.2 µF).
- The VCAP1 pin has a capacitor to GND on 6 of 6 designs, most often 2.2 µF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: VCC 100% |
|
| PC13_(RTC_AF1)pin 2 | Connected to: Not connected 67% · a signal 33% | — |
| PC14-OSC32_INpin 3 | Connected to: Not connected 83% · a signal 17% | — |
| PC15-OSC32_OUTpin 4 | Connected to: Not connected 100% | — |
| PH0-OSC_INpin 5 | Connected to: Signal 100% |
|
| PH1-OSC_OUTpin 6 | Connected to: Signal 100% |
|
| NRSTpin 7 | Connected to: A connector 83% |
|
| PC0(ADC123_IN10)pin 8 | Connected to: Signal 83% · not connected 17% |
|
| PC1(ADC123_IN11)pin 9 | Connected to: Signal 83% · not connected 17% |
|
| PC2(ADC123_IN12)pin 10 | Connected to: Signal 83% · not connected 17% |
|
| PC3(ADC123_IN13)pin 11 | Connected to: Signal 67% · not connected 33% |
|
| VSSApin 12 | Connected to: GND 100% | — |
| VDDApin 13 | Connected to: VCC 100% |
|
| PA0(ADC123_IN0/WKUP)pin 14 | Connected to: Signal 67% · not connected 17% · VBAT_SENSE 17% |
|
| PA1(ADC123_IN1)pin 15 | Connected to: Signal 67% · not connected 33% |
|
| PA2(ADC123_IN2)pin 16 | Connected to: A connector 33% |
|
| PA3(ADC123_IN3)pin 17 | Connected to: A connector 33% · not connected 17% |
|
| VSSpin 18, 63 | Connected to: GND 100% | — |
| VDDpin 19, 32, 48, 64 | Connected to: VCC 100% |
|
| PA4(ADC12_IN4/DAC1_OUT)pin 20 | Connected to: Not connected 67% · a signal 33% | — |
| PA6(ADC12_IN6)pin 22 | Connected to: Not connected 67% · a signal 33% | — |
| PA7(ADC12_IN7)pin 23 | Connected to: Not connected 67% · a signal 33% | — |
| PC4(ADC12_IN14)pin 24 | Connected to: Not connected 50% · a signal 50% |
|
| PC5(ADC12_IN15)pin 25 | Connected to: Not connected 83% · a signal 17% | — |
| PB2-BOOT1pin 28 | Connected to: C967633 50% · not connected 33% |
|
| PB10pin 29 | Connected to: Not connected 67% · a signal 33% | — |
| PB11pin 30 | Connected to: Not connected 67% · a signal 33% | — |
| VCAP1pin 31 | Connected to: Signal 100% |
|
| PB12pin 33 | Connected to: Not connected 67% · a signal 33% | — |
| PC6pin 37 | Connected to: A connector 50% · not connected 33% |
|
| PC7pin 38 | Connected to: A connector 50% · not connected 17% |
|
| PC8pin 39 | Connected to: A connector 50% · not connected 17% |
|
| PA11pin 44 | Connected to: C7519 33% |
|
| PA12pin 45 | Connected to: C7519 33% |
|
| VCAP2pin 47 | Connected to: Signal 100% |
|
| PA15(JTDI)pin 50 | Connected to: C967633 50% · not connected 33% |
|
| PD2pin 54 | Connected to: Not connected 83% · a signal 17% | — |
| PB4(NJTRST)pin 56 | Connected to: Not connected 83% · a signal 17% | — |
| BOOT0(VPP)pin 60 | Connected to: GND 50% · a signal 50% |
|
21 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include VESC6 OPEN HARDWARE by craigg96, Driva x2 by owennewo, Rocket-Build by Ben-Blair and VESC6 OPEN HARDWARE by duwogus7650-ctrl.
The C15742 in open source designs
The gallery holds 6 open source boards using the C15742 from 6 GitHub repositories; a typical one measures about 105 × 45 mm and carries around 118 components.
100% use four copper layers or more, and 17% carry an open source license.
The most starred is VESC6 OPEN HARDWARE by craigg96.
Microcontrollers on boards using the C15742
What boards using the C15742 are built for
C15742: common questions
Where can I find a C15742 reference design?
Each of the 6 boards on this page is a real design using the C15742. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the C15742 VBAT pin?
The VBAT pin has a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 6 open source designs using the C15742.
How is the C15742 PH0-OSC_IN pin connected?
The PH0-OSC_IN pin has a capacitor to GND on 6 of 6 designs, most often 15 pF (then 12 pF). Counted from the KiCad layouts of 6 open source designs using the C15742.
What decoupling capacitors do designs use on the C15742 VDD pin?
The VDD pins have a decoupling capacitor on 6 of 6 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 6 open source designs using the C15742.
What parts are used alongside the C15742?
The C124020, C477918, C495342, C967633 and C98969 appear in the most repositories here.
Which microcontrollers do boards using the C15742 use?
Most are built on STM32 (6).
How big is a typical board using the C15742?
The median is 105 × 45 mm, and 0% are two-layer designs.
What is the most popular open source board using the C15742?
By GitHub stars, VESC6 OPEN HARDWARE by craigg96, with 24 stars.
Can I simulate one of these boards using the C15742 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.